WTB Mopar A/B/C/E Body Rear Pair of Car Moving Body Wheels

Sixpaksteve · Jan 30, 2021

Looking for a pair of used but usable rear body moving wheels from someone cleaning out their garage who doesn't need these anymore. These are the rear only 8" wheels and their brackets that bolt to the leaf spring front hanger location.

Must be these wheels. I'm doing a 1964 B Body now and will do my 70 E Body next [in retirement].

I know these are available new at US Car Tool and other sources.....

Thanks!

493 Mike · Jan 30, 2021

Pretty easy to make. 3"x1/4" angle iron and a piece of 1/4" plate for the caster.
Mike

Sixpaksteve · Jan 31, 2021

493 Mike said:
Pretty easy to make. 3"x1/4" angle iron and a piece of 1/4" plate for the caster.
Mike

Hi Mike.
And I'm about ready to agree with you and go that route. A decent 8" caster wheel is about $32 and the 1/4" angle and plate isn't all that expensive, but cutting it with a sawzaw and then drilling it with a hand drill is a bit of a P.I.T.A.. I can do my own welding so that's not a problem......

Just thought I'd see first if a member here had a pair they weren't ever going to use again and if that were the case we might do each other a favor....

hemlock · Feb 2, 2021

I've got a set from Auto Twirler, I used them on my 65 Belvedere, they've been sitting around since the car got reassembled. They look kind of ugly because the car was on them when it got media blasted and it took the paint off. They have very little use, I would take $125 for them

Sixpaksteve · Feb 3, 2021

PM sent...

WTB Mopar A/B/C/E Body Rear Pair of Car Moving Body Wheels

Sixpaksteve

FBBO Gold Member

493 Mike

FBBO Gold Member

Sixpaksteve

FBBO Gold Member

hemlock

Well-Known Member

Sixpaksteve

FBBO Gold Member

Similar threads