• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Is this transmission mount TOO tall ?

Kern Dog

Life is full of turns. Build your car to handle.
FBBO Gold Member
Local time
6:46 AM
Joined
Apr 13, 2012
Messages
35,082
Reaction score
123,355
Location
Granite Bay CA
SST 211.JPG
SST 212.JPG


The reason that I ask.....
I am getting ready to install a 383 & 727 into THIS car....

Jiggy F 9.JPG


It looks to me like the mount is taller than it should be. It was in the parts shed along with other parts....some of them are from parts stashes that I have collected over the years. It fits in the crossmember but it just seems taller than I'd expect.
 
Just looking at your pic I think you are ok. As my old mind seems to recall the mount lining up with the bolt holes. Hopefully this helps.
 
View attachment 1073643 View attachment 1073644

The reason that I ask.....
I am getting ready to install a 383 & 727 into THIS car....

View attachment 1073648

It looks to me like the mount is taller than it should be. It was in the parts shed along with other parts....some of them are from parts stashes that I have collected over the years. It fits in the crossmember but it just seems taller than I'd expect.
Lois ok to me. Don’t forget the plate that goes between the mount and tranny. Kim
 
Looks good to me. I don't think those are made in multiple heights.
 
Lois ok to me. Don’t forget the plate that goes between the mount and tranny. Kim
Never took one apart with a plate in there. And I've pulled a lot of engines/trans. Maybe some had it fore pinion angle adjustment.
 
Auto Transport Service
Back
Top