WTB poly 4 barrel intake manifold
- Thread starter Fury Guy
- Start date
- Status
- Local time
- 2:07 AM
- Joined
- May 14, 2011
- Messages
- 17,176
- Reaction score
- 32,277
- Location
- On the Ridge, TN
These folks have developed one. No idea if they're currently available, though:
https://cpwebstore.com/Poly
Other than that, I guess you have to get lucky finding the old Weiand 7503...
https://cpwebstore.com/Poly
Other than that, I guess you have to get lucky finding the old Weiand 7503...
Fury Guy
Member
Thanks I tried to contact them via e-mail but received no response. Also I looked all over the country on facebook marketplace with no luck. I guess I'll just keep trying
- Local time
- 2:07 AM
- Joined
- May 14, 2011
- Messages
- 17,176
- Reaction score
- 32,277
- Location
- On the Ridge, TN
One will pop loose. Good luck!
Fury Guy
Member
ThanksOne will pop loose. Good luck!
Not cheap and you probably don't want dual quads. https://www.forabodiesonly.com/mopar/threads/318-poly-dual-quad-intake-manifold.484137/
Fury Guy
Member
If anything pops up in your neck of the woods could you let me know? Thanks
Call the webstore and leave a message, they’ll get back to you eventually. After Roland Osborne died it’s a little hit and miss to contact anybody. 607-261-1255. They aren’t cheap, they also sell camshafts, headers, cast valve covers, etc...
Fury Guy
Member
Will do thank you. It seems I got into the game a little late when it comes to poly motors.
MiradaMegaCab
Well-Known Member
https://www.hotrod.com/articles/426-cube-318-poly-can-outgun-hemis/
I know this doesn’t exactly apply to the OP’s intended application but it is an option for others...
I know this doesn’t exactly apply to the OP’s intended application but it is an option for others...
barbee6043
Well-Known Member
- Local time
- 1:07 AM
- Joined
- Sep 28, 2008
- Messages
- 2,554
- Reaction score
- 2,474
- Location
- S E Texas. Shepherd, texas
I have an old Weiand poly 4 bbl intake. PM if interested/
I may have spoke too soon, after checking out their website it appears they have temporarily shut down. I hope it’s temporary, or they can find somebody to take over. One of the few sources for A-engine parts and information. Also lookup Gary Pavlovich and Bruce Toth for more information.
Fury Guy
Member
Thanks for the intel
Fury Guy
Member
This is an interesting idea, I am a patternmaker and actually thought about creating a fabricated poly manifold from a similar sized standard engine manifold, But it would be easier to just find one so i am going that route first to see what happens.
The CPPA Wind Tunnel manifold was adapted from a first generation Hemi manifold from Hot Heads.
MiradaMegaCab
Well-Known Member
The adapter plates would make for an interesting “wow” factor to an already interesting Poly engine, as they are few and far between.
https://www.forabodiesonly.com/mopar/threads/chev-intake.390610/#post-1971828249
https://www.forabodiesonly.com/mopar/threads/chev-intake.390610/#post-1971828249
- Status
Similar threads
