jay t.
Well-Known Member
Are 904 shift cables the same as small block 727 cables? Thanks
Floor shift cables
- Thread starter jay t.
- Start date
- Local time
- 6:36 PM
- Joined
- Dec 31, 2020
- Messages
- 6,576
- Reaction score
- 14,379
- Location
- Ontario, Canada
According to my 1964 Dodge parts manual, the push button shift cables and park cables are same whether 904 or 727. I could not find console shift cables in my book for 904. I don't think that became option until 1965 Dart/Barracuda. But, based on interchangeability of push button cable sets, I would have to think the console shift cable set would interchange as well. Note that the push button cable set (park and shift) do not interchange with the console shift set. They are each different lengths. I hope this helps.
jay t.
Well-Known Member
Thanks for the info. It looks like the cable ends that connect to the shifter are different for push button and floor/console shift. Push button has a smaller hole. My other concern was if the ends that go into the trans are different between the two transmissions
- Local time
- 6:36 PM
- Joined
- Dec 31, 2020
- Messages
- 6,576
- Reaction score
- 14,379
- Location
- Ontario, Canada
The ends that connect to trans are the same.
jay t.
Well-Known Member
Ok Dave thanks , nice 64 by the way
Similar threads
- Locked
