WTB Harness and bulb holder for glove box curtesy light/switch - 66 Satellite

• Mar 19, 2021

• #1

AR67GTX

FBBO Gold Member

FBBO Gold Member

Local time

11:12 AM

Joined

Jan 28, 2012

Messages

4,842

Reaction score

4,368

Location

Arkansas

Feedback: 12 / 0 / 0

Anyone have a spare harness to the glove box light and the bulb holder/switch they can sell? It plugs into the bullet connection/red wire lead off the main harness and has two leads - one to the cigarette lighter and the other over to the glove box light - all bullet terminals although it may be a spade terminal at the bulb holder. My bulb holder/switch seems to have the terminal broken off so not sure.

PM me if you have one.

Thanks

 

• Mar 19, 2021

• #2

joerachet

Well-Known Member

Local time

11:12 AM

Joined

Feb 26, 2014

Messages

2,080

Reaction score

243

Location

USA

Feedback: 20 / 0 / 0

I have this one

 

• Mar 19, 2021

• #3

AR67GTX

FBBO Gold Member

FBBO Gold Member

Local time

11:12 AM

Joined

Jan 28, 2012

Messages

4,842

Reaction score

4,368

Location

Arkansas

Feedback: 12 / 0 / 0

Not sure I recognize that off hand Joe??

 

• Mar 19, 2021

• #4

joerachet

Well-Known Member

Local time

11:12 AM

Joined

Feb 26, 2014

Messages

2,080

Reaction score

243

Location

USA

Feedback: 20 / 0 / 0

It's off a 67 Coronet

 

• Mar 19, 2021

• #5

AR67GTX

FBBO Gold Member

FBBO Gold Member

Local time

11:12 AM

Joined

Jan 28, 2012

Messages

4,842

Reaction score

4,368

Location

Arkansas

Feedback: 12 / 0 / 0

I bet that’s the bulb holder that screws to the dash after studying it. I actually have that although I think the electrical contact is broken off of it. I might be able to fabricate a contact for mine. I can also make up the harness but the bullet terminals I have on hand are pretty light weight pieces and if I can find a factory harness with the heavier OEM bullet terminals I would prefer to use one.

 

• Mar 19, 2021

• #6

'68 Charger

Well-Known Member

Local time

12:12 PM

Joined

Jun 18, 2012

Messages

1,733

Reaction score

576

Location

Akron, Ohio

Feedback: 67 / 0 / 0

Is this what you're looking for? It would need a connector, either a bullet type or female type connectors. I know I have a bulb for it laying around somewhere.

 

• Mar 20, 2021

• #7

AR67GTX

FBBO Gold Member

FBBO Gold Member

Local time

11:12 AM

Joined

Jan 28, 2012

Messages

4,842

Reaction score

4,368

Location

Arkansas

Feedback: 12 / 0 / 0

Thanks - but it just occurred to me that I have a female bullet connector and male bullt connectors for door switches on my old dash wiring harness that I can probably cut off and use to fabricate a harness to the lighter and glovebox light. I will have to fabricate a connector/contact for the light bulb holder since mine is missing but I don't think it will be too hard to do.