What did you do today....other than work on your car!?
- Thread starter Cranky
- Start date
- Local time
- 10:14 PM
- Joined
- Dec 25, 2011
- Messages
- 5,246
- Reaction score
- 6,330
- Location
- White Cloud, MI
I finished up a sheet metal brake for my shop. Every component except casters and some bolts came from my stock. The base horizontals are filled with sand for weight/stability. It's 50" wide so I can bend a 48" sheet. It even incorporates 2 318 Poly valve springs!
Mike
Mike
Mopars & Missiles
Well-Known Member
- Local time
- 10:14 PM
- Joined
- Nov 22, 2010
- Messages
- 2,072
- Reaction score
- 3,275
- Location
- Northern Indiana
Planted seven shagbark hickory trees after clearing areas in the wood and digging/prepping the holes. Raining and temps in the 40s...no snakes out and about today. Perfect. Found a wild animal burrow. Left that alone and planted the tree elsewhere!
Cruised over to Lowes for various goodies.
Low-key day today.
Cruised over to Lowes for various goodies.
Low-key day today.
Beep!Beep!
Well-Known Member
moving sold my house and have till Friday to go
I helped clear another lot for rebuilding after the fire.
3 years ago an old pickup broke down & caught fire below this nice elderly couple's house & burned it down. They had it rebuilt, lived in it a year and another
fire got it AGAIN last September!
This time it got all but one of his old tractors/cats.
Some of the views:
Here's the chipping difference between oak,
And dried up bay trees.
That stuff turns to powder.
3 years ago an old pickup broke down & caught fire below this nice elderly couple's house & burned it down. They had it rebuilt, lived in it a year and another
fire got it AGAIN last September!This time it got all but one of his old tractors/cats.
Some of the views:
Here's the chipping difference between oak,
Where to? We want to move also.
- Local time
- 10:14 PM
- Joined
- Dec 3, 2020
- Messages
- 9,351
- Reaction score
- 22,407
- Location
- western Maryland
Made some progress...
I have white facing for the sides of the pantry, and black kicks for under the cabinets. Now I just need to tile the other 120sf of the room's floor. It was going to mark "kitchen" and "dining room"...but the kitchen don't fit! If I add the row where the loose tiles are in the photo, the "dining room" turns into a goofy looking strip of hardwood and it just looks out of balance. Meh. 12x24" tiles fill space pretty quickly.
(I also made a cheesy temporary floor for the Charger's back seat, and put the interior back in...I was tired of not being able to drive it while I wait until MAY for my AMD floor to come off backorder...)
I have white facing for the sides of the pantry, and black kicks for under the cabinets. Now I just need to tile the other 120sf of the room's floor. It was going to mark "kitchen" and "dining room"...but the kitchen don't fit! If I add the row where the loose tiles are in the photo, the "dining room" turns into a goofy looking strip of hardwood and it just looks out of balance. Meh. 12x24" tiles fill space pretty quickly.
(I also made a cheesy temporary floor for the Charger's back seat, and put the interior back in...I was tired of not being able to drive it while I wait until MAY for my AMD floor to come off backorder...)
- Local time
- 10:14 PM
- Joined
- May 14, 2011
- Messages
- 17,193
- Reaction score
- 32,313
- Location
- On the Ridge, TN
Congrats, looks pretty. Always good to set root somewhere eventually.
- Local time
- 10:14 PM
- Joined
- May 14, 2011
- Messages
- 17,193
- Reaction score
- 32,313
- Location
- On the Ridge, TN
Went from freezing our butts off and rain every day last couple weeks to....POOF, time to mow!
Sheesh...I reckon there's a reason this is farming country.
Tractor time, graded the roads again, then hooked up the finish mower and cleared debris and mowed
a while on the north 40.
Yee ha.
Sheesh...I reckon there's a reason this is farming country.
Tractor time, graded the roads again, then hooked up the finish mower and cleared debris and mowed
a while on the north 40.
Yee ha.
Haha I'm still a month from mowing, but its 70 degrees here today, i may be wrong....
- Local time
- 10:14 PM
- Joined
- May 14, 2011
- Messages
- 17,193
- Reaction score
- 32,313
- Location
- On the Ridge, TN
- Local time
- 9:14 PM
- Joined
- Dec 4, 2009
- Messages
- 34,006
- Reaction score
- 41,682
- Location
- Pasadena, Texas
And the older you get, falling down becomes more and more dangerous and it seems to escalate once you get into your late 60's. At least it did for me and I noticed I bruise easier over the last year or so.
Several years ago I bought a Connecticut U416 finger brake that only had 3 of it's original fingers. How do people lose this stuff? Someone used it for parts for a larger one that was missing fingers?? Oh well, got it cheap and then made new fingers and it's worked well for everything I've needed to do so far. Made a stand with wheels but wish now I had used 4 swivel wheels instead of 2.....but it's probably all I had on hand at the time.
- Local time
- 10:14 PM
- Joined
- Oct 16, 2014
- Messages
- 28,674
- Reaction score
- 67,400
- Location
- Salisbury, Vermont
Yeah, it's been several days now and my tail bone area is still tender...try to stretch twice a day to keep the muscles there from getting stiff.
Beep!Beep!
Well-Known Member
still moving
- Local time
- 10:14 PM
- Joined
- Jan 29, 2018
- Messages
- 19,372
- Reaction score
- 63,265
- Location
- Midland Ontario, Canada
Corporate income tax returns on my Birthday FFS.. One down, two businesses to go...
- Local time
- 10:14 PM
- Joined
- Oct 16, 2014
- Messages
- 28,674
- Reaction score
- 67,400
- Location
- Salisbury, Vermont
You don't have "people" for that?
- Local time
- 10:14 PM
- Joined
- Dec 3, 2020
- Messages
- 9,351
- Reaction score
- 22,407
- Location
- western Maryland
...I need to get off my *** and do mine....
This year is gonna suck. Day job, LLC rental properties...and I sold one of my rentals last year so capital gains is gonna kill me.
I'm not looking forward to it.
Similar threads
