mopar 394
Member
Can anyone give me a good place to get a 4 speed rebuilt? Preferably about 120 miles around Fort Wayne Indiana. Thanks
4 speed transmission rebuild
- Thread starter mopar 394
- Start date
- Local time
- 8:04 PM
- Joined
- Jul 1, 2015
- Messages
- 4,583
- Reaction score
- 5,544
POSSIBLY CONSIDER....
Technical Advice: Available by calling (317) 831-5610 Monday - Thursday, between the hours of 4:00 PM - 6:00 PM EDT, faxing (317) 831-9710, emailing us at [email protected] or writing to A&A Transmission, 5061 E N County Line Road, Camby, IN 46113.
A&A Transmissions
5061 E N County Line Road
Camby, IN 46113
(317) 831-3066
They are an EXCELLENT source for automatic transmission parts. IF they don't do 4 speeds, perhaps they can recommend some one near you.
BTW....PASSON Performance is another Excellent source but they are in Pennsylvania.
BOB RENTON
69 hemibee
Well-Known Member
If you are mechanically inclined you can do it yourself with a rebuild kit in a weekend. I just did it and was glad I did.
mopar 394
Member
Does it require any specialty tools?
like hemi bee and others here I did mine myself as well very easy task and no special tools other than a length of 3/4” emt conduit for installing the needle bearings in the counter gear and installing it in the case. You will need a press to remove and install the bearings.
69 hemibee
Well-Known Member
I bought a rebuild book off Amazon from passion performance and a rebuild kit from Brewers. As mentioned, a arbor press is nice but you can creative on pressing the new bearings on the tail shaft.
- Local time
- 9:04 PM
- Joined
- Sep 15, 2009
- Messages
- 17,640
- Reaction score
- 32,928
- Location
- State of insanity
Don't lose the roller bearings... they like to hide in hidden places. Especially after they all come falling out like marbles. Don't ask me how I know that.
Similar threads
