• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1962 361 where do these go?

Derv

Well-Known Member
Local time
5:19 PM
Joined
Feb 20, 2018
Messages
273
Reaction score
210
Location
Calgary
I took it apart but cannot remember where these go. Manual not much help. Any advice would be appreciated.

image.jpg image.jpg image.jpg
 
Hey Darren, if your going full stock l can't help. Otherwise I'd just put them where your wires won't get burnt. I'm sure other's will know
Jack
 
My 66 361 has two of the top ones. They mount on the first exhaust stud on each side. The very bottom picture is the heat shield that mounts to the drivers side manifold

IMG_20210402_144929.jpg
 
I also have a four wire loom that mounts to the thermostat housing. That may be the one with the smaller bolt hole
 
I always take a picture before I take it apart... The problem is I usually can't find the pictures when I need them as at my age I have a lot of "senior moments".....and half the time I cannot find the camera!!!!!!
 
Auto Transport Service
Back
Top