• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Molded water valve hose (for air-conditioned cars)

VFilms

Well-Known Member
Local time
1:48 AM
Joined
Nov 12, 2014
Messages
1,420
Reaction score
2,740
Location
Saratoga NY
Anybody know where I can buy this molded hose for the water valve? MoparMall has a complete set of hoses, etc, for $200. But I don't need everything that comes in that kit.
Thanks

heater w AC molded hose.jpg
 
If you have a friendly auto parts store you can go look at all the molded hoses they have and find one that you can trim the ends off and will fit there. I’ve done it for other cars that don’t show the molded hose.

I can post the lengths of each side, they are not equal. It’s 5/8” on both ends.
 
If you have a friendly auto parts store you can go look at all the molded hoses they have and find one that you can trim the ends off and will fit there. I’ve done it for other cars that don’t show the molded hose.

I can post the lengths of each side, they are not equal. It’s 5/8” on both ends.
Thanks. NAPA makes a molded hose like this for the LS engines. Not keen on putting a Chevy part on my Plymouth. Afraid the MOPAR gods will smite me.
 
I searched for a molded hose that would fit for a while and finally gave up. Wasn't paying MoparMall $200 for only one piece either. I used good quality heater hose, made sure I had plenty of length and it fits and works fine. The hose is a bit longer than the molded version but it works fine and looks good too. If you find an exact fit I would be interested also.
 
I was not aware there was a molded hose for these............I just made my own from Gates 5/8" heater hose.

100_9377.JPG
 
Bill Rolik Enterprises sells these separate. Like 25 bucks.
 
Auto Transport Service
Back
Top