• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Can you identify the year of a engine harness...

bandit67

FBBO Gold Member
FBBO Gold Member
Local time
11:32 AM
Joined
Feb 29, 2020
Messages
2,944
Reaction score
5,424
Location
Heart of Dixie.....
Guys, pulled this engine harness off my 73 and noticed it seems modified and pretty sure it is NOT original to a 73 400/440. Found two numbers on the tag near the bulkhead connection; can we tell what year and what engine it is from: numbers 95329C and 376495. Car was a factory 4 speed but had been changed over to an automatic, and I bet that harness is/was from the donor car.....thanks..
 
upload_2021-5-2_15-37-53.png
:thumbsup:
 
yes, PN will identify it BUT, Chrysler PNs got 7 characters, not 6.

Manual and auto cars should get same harness. Transmission related harnesses are separated harnesses
 
Can t see another digit on part number. Appears a PO had cut out wiring for the electronic ignition as engine was running a point dizzy. Just curious what it came from. They had bypassed the amp meter and I am wanting it all back factory original.

IMG_0256.jpg IMG_0255.jpg IMG_0254.jpg
 
that's a 74 harness, a totally diff monster from earliers. If BB and you don't want it, I could get it :D

althought it seems to be small block
 
Last edited:
1974 - Depending on the last # it could be as Nacho says, 318/360 w 50 amp alt (3764955) or (3764954) A body also 74.
 
I need to get the numbers off the 727 that I pulled from the car. It may be a 1974 tranny. A PO in the past swapped out the original four speed and put in an auto and different 8 3/4 rear. I would bet thats where the engine and harness also came from. Pretty sure Im not going to use it Nacho. thanks guys.....
 
Auto Transport Service
Back
Top