Muffler hanger bracket

65-440 · May 17, 2021

About to install my new TTI exhaust and I have to install a pass side muffler hanger bracket. Anyone that's done this before have pictures? Was hoping to find a template but finding nothing. Last thing I want to do is drill 4 holes in the wrong place!

pnora · May 17, 2021

There were dimples on my 69 Chargers panel that matched up to the bracket

PRND21 · May 17, 2021

There were dimples on my 65 Belvedere, also. I welded mine on like the left side, and the brackets are different from side to side.

Edit: 5/18/21 If your car is under coated you might not be able to see the dimples from underneath.

diesel_lv · May 17, 2021

It was very dark under my car, I measured the existing hanger and then held TTI hanger in spot and used it as it's own template.

65-440 · May 18, 2021

Awesome ! Thanks guys, I didn't see any dimples from underneath the car. Hopefully once I have the back seat out I'll see them!

Darter6 · May 18, 2021

This is the best photo I got of a B body (64) Factory fuel line at top.The folds/pletes of the floor gives the location.

Muffler hanger bracket

65-440

Well-Known Member

pnora

FBBO Gold Member

PRND21

FBBO Gold Member

diesel_lv

Well-Known Member

65-440

Well-Known Member

Darter6

Well-Known Member

Similar threads