64 Plymouth Quarter Panel

64Orange · May 20, 2021

Hello FBBO!

The driver's side quarter panel on my 64 Sport Fury has rust all along the wheel arch. I have been looking for a patch panel but I have not been having good luck. I have seen patch panels from Sherman that'll fit a 64 Dodge Polara and after talking with a few folks it appears that the Dodge and Plymouth arches are slightly different. Any suggestions on where to find a patch? Or do I need to think bigger and get a whole quarter panel?

https://www.summitracing.com/parts/SHI-185-59L?rrec=true

Thank you!

493 Mike · May 20, 2021

Looks like you need a quarter panel and most likely the outer wheel house. Good luck!
Mike

Nate S · May 20, 2021

The Sherman stuff is known to be pretty poor. That said, it's probably easier than beating it out of a sheet of flat metal yourself. Might find an AMD panel someone bought but didn't use of you're lucky.

peabodyracin · May 20, 2021

I'll second the comment about poor regarding the Sherman panels. I bought a set for a 65 Belvedere and was not at all happy with the end result, even after a ton of hand work trying to make them work. They were worth no where near what they charged for them.

Dan64 · May 20, 2021

Sherman stuff can be pretty rough but i used their 1/4 repair patches ( only ones to be found) and thought they were ok. Here is the thing, the panels they sell are for Plymouths and not really correct for a Dodge. The repair panels have a rounded edge on them like a Plymouth and not a flat edge like a Dodge. Other than that they are the same so if you can find them your in luck.

Dodge33 · May 20, 2021

Try member (moparmarks) here on the site. He does have quite a bit of
excellent used mopar metal from the southwestern USA. He may have a cutoff
off, either 2dr or 4dr, but the Plymouth models seem to be very hard to come
by, versus the Dodge models. If he can't help.. about all that's available would
be either in Arizona or Ca. or maybe find something up the west coast to the
north. Good luck by all means!

Fm3 Dart · May 22, 2021

See if you can locate an AMD full quarter. I installed one on a 64 Belvedere and it was flawless. Just like an NOS panel. However, AMD dropped them a year ago

Dave6T4 · May 22, 2021

Try Joe Suchy, Dalton, Georgia. I don't have his info right at hand, but you can find him online. '64 Plymouth guy.

funnykarman · May 22, 2021

[email protected] 770-964-4441

64Orange · Jun 2, 2021

Thank you for all responses. Sorry for the delay, work and family, you know. I tried Joe Suchy but had no luck. I was looking at the Sherman stuff and it may be my best option at the moment. I'll try moparmarks first

Fm3 Dart said:
See if you can locate an AMD full quarter. I installed one on a 64 Belvedere and it was flawless. Just like an NOS panel. However, AMD dropped them a year ago

I've noticed that they dropped the quarter panel a while ago. What a bummer

64 Plymouth Quarter Panel

64Orange

Well-Known Member

493 Mike

FBBO Gold Member

Nate S

Well-Known Member

peabodyracin

FBBO Gold Member

Dan64

Well-Known Member

Dodge33

Well-Known Member

Fm3 Dart

Well-Known Member

Dave6T4

FBBO Gold Member

funnykarman

Well-Known Member

64Orange

Well-Known Member

Similar threads