Is this the oil sending unit? Where does the line go to?

• May 21, 2021

• #1

Dean Prevolos

FBBO Gold Member

FBBO Gold Member

Local time

3:42 PM

Joined

Sep 3, 2020

Messages

598

Reaction score

406

Location

Naples, Florida

 

• May 21, 2021

• #2

R

R413

Well-Known Member

Local time

12:42 PM

Joined

Feb 4, 2019

Messages

5,703

Reaction score

16,401

Location

NW USA

That is attached to the battery cable. It runs up by the master cylinder and plugs into the harness by the master cylinder. Hemi specific under hood wire harnesses.

 

Last edited: May 21, 2021

• May 21, 2021

• #3

65wgn440

Well-Known Member

Local time

3:42 PM

Joined

Aug 16, 2016

Messages

665

Reaction score

816

Location

Toledo, Ohio

Yes. Electrical wire would go to gauge/ light in dash.

 

• May 22, 2021

• #4

Dean Prevolos

FBBO Gold Member

FBBO Gold Member

Local time

3:42 PM

Joined

Sep 3, 2020

Messages

598

Reaction score

406

Location

Naples, Florida

Thanks for the answers. I will have to look up the part number and try to track that part down. That has to be the last part I need to locate for my car assembly. Thank you.

 

• May 22, 2021

• #5

gtx6970

Well-Known Member

Local time

12:42 PM

Joined

Dec 29, 2015

Messages

3,911

Reaction score

7,670

Location

Tucson AZ

Just an FYI, the sender shown is for an oil GAUGE equipped car.

The oil LIGHT equipped car sender is much smaller

 

• May 22, 2021

• #6

R

R413

Well-Known Member

Local time

12:42 PM

Joined

Feb 4, 2019

Messages

5,703

Reaction score

16,401

Location

NW USA

That wiring comes with a reproduction battery cable. So all you need is a few hundred bucks.

He has a Charger, and it’s not his photo since he needs to find this harness.

 

• May 23, 2021

• #7

Dean Prevolos

FBBO Gold Member

FBBO Gold Member

Local time

3:42 PM

Joined

Sep 3, 2020

Messages

598

Reaction score

406

Location

Naples, Florida

R413 said:

That wiring comes with a reproduction battery cable. So all you need is a few hundred bucks.

He has a Charger, and it’s not his photo since he needs to find this harness.

Click to expand...

Exactly, I am using the photo as a reference. I will look at my battery cable more closely, I have the engine outof the car and it is easy enough to look at the battery cable today. Thanks.

 

• May 24, 2021

• #8

Dean Prevolos

FBBO Gold Member

FBBO Gold Member

Local time

3:42 PM

Joined

Sep 3, 2020

Messages

598

Reaction score

406

Location

Naples, Florida

R413 said:

That wiring comes with a reproduction battery cable. So all you need is a few hundred bucks.

He has a Charger, and it’s not his photo since he needs to find this harness.

Click to expand...

I have posted a photo of my battery cable wires, which come off the positive battery clamp. 4 wires, one for starter is obvious. I looked in my service manual electrical diagram(page 8-125)
low oil pressure switch iwires G6 and G6A are grey. Any thoughts on the other three wires.

I bought the car with the engine out of the car. So I am learning the Hemi wiring from scratch.