• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New member with 66 Satellite

Karlos

Member
Local time
2:39 AM
Joined
Oct 9, 2020
Messages
10
Reaction score
8
Location
Vancouver Island
hey y’all
Am putting super stock springs in and the spring hanger with for 20” front leaf section are non existent...?
Also been reading on the old update for dual master from single pot. ‘67 dual master and then the two lines leading into the proportion valve? Rock auto has the dual master for cheap!! But where do I find the two lines to proportion valve and keep the rust the same. FYI all drums for now but looking at Scarebird for the front disc change. Is it worth it? I think it was listed as ford or Lincoln calipers...?
FYI, loving the Mopar help etc, had lots of Chevy, GM stuff up in Canada so I have had somerar Acadian, Beaumont over the years but the Mopar family is TIGHT!

E3A0F5E9-9CB1-4894-AB52-23EA5BC45952.jpeg
 
Nice car! You may want to check out Dr. Diff for the front disc upgrade. A lot of people here have his setup (including yours truly), and really like it. Oh, and... Welcome to the clan!

the clan.jpg
 
Not really a proportioning valve, but the splitter valve with lines package is on ebay.

Might be easier to find parts for an OEM F/M/J disk conversion.

A lot of those scarebird kits use somewhat hard to find or 1-2 year only ford and gm parts and some require machining of the disks.
 
My Dr. Diff setup uses Aspen/Volare' rotors.
 
Welcome to another 66 Satellite guy,glad to have you
 
Welcome aboard from Ohio. Think Mancini Racing has those frt. spring hangers.
 
Auto Transport Service
Back
Top