• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Made In USA Thread

Not really a surprise since I look for American made products but here my new stud gun from Summit.
IMG_20200723_140641517.jpg
 
Edelbrock, in LA area, Torrance Ca.

Holley, Bowling Green Kentucky,
like 10+ or more brands under that label now

Quickfuel, Bowling Green Kentucky

QA1, Lakeville Minnesota

Strange Engineering, Morton Grove Il.

Crane, Daytona Beach Fla.

Lunati, Olive Branch Ms.

Chris Alston Chassisworks, Sacramento Ca.

Moroso/Competition Engineering, Guilford Ct.

Aeromotive Inc., Overland Park Ks.

above is just a fraction of the many "parts" or specialty supply businesses
it's not a very short list, like said by someone, 10's of thousands
especially the smaller Mom & pop shops & distributors
it's extensive, you just need to look for it/them
it may take more time but you can find Made in USA products easily
especially the SEMA affiliated stuff
 
alfaitalia said:
If it's anything like here I still would be cautious...sometimes "Made in Great Britain" can actually mean "Assembled" in GB...with the items being imported from China or wherever as parts (almost in kit form) and just put together here and a "Made In GB" sticker slapped on it. This is mainly done to get around import taxes.....but how many buyers think that it's a British product?
Click to expand...
Like this?
DA0D79F4-F5E7-4837-B64F-E77D0A482B26.jpeg


A lot of funnels seem to be made here.
These were right next to some Chinese ones and one could discern the quality difference by just looking at them.
4BC8BB37-2EA8-405D-A23A-C5869A86BBDE.jpeg

7141A474-4CCE-4BD0-ABAA-58F8F3CAE5EF.jpeg
 
Nice quality from Lang Tools.

20200803_105211.jpg
 
440 Source crank pulley shims.

20201201_163830.jpg
 
I don't have a box for a picture but the Taylor 'Thundervolt 8.2" cut-to-fit spark plug wire sets I use are made in U.S.A.
According to their website all their wires are.
 
Griots Garage hand siphon made in USA. I need to pump diff fluid out for the 500 mile gear set break in. Tired of one use only harbor freight pumps. If you have Hagerty you get a 10% discount at Griots Garage.

20210103_114316.jpg
 
Sort of a tool for detailing. These can be machined washed with your microfiber towels. Made in the USA and last quite awhile.

20210103_114800.jpg
 
I do believe most Holley brands have moved over to China, the MR Gasket brand is, Accel coils are( just bought one) and it matches my old MSD it replaced for my 5.9.. I believe they are watered down and chinesium now..
 
I don't know why everyone uses msd electronics in cars so often, their quality isn't what it was and they make pretty much everything over seas.

Check out daytona sensors, I love my setup from them and wait for it.........

Made in USA!
 
I used to make hunter alignment parts! They were based in St.Louis. I machined magnesium extrusions that the heads were on that went on the wheel.. 20 years ago.
 
You must log in or register to reply here.

Similar threads

Triplegreen500
Made in USA beverage mug?
Replies
15
Views
962
kiwigtx
kiwigtx
IndySatLite
Mopar newbie
Replies
15
Views
1K
khryslerkid
khryslerkid
Auto Transport Service
Back
Top