B/E Front Suspension Compatibility???

westie47 · Jun 6, 2021

My buddy offered me a good deal on a brand new QA1 front suspension setup he bought for his 70 Cuda but is now going a different direction. Will the upper/lower control arms bolt up to my 69 Coronet? The QA1 website shows two different part numbers DK11-CRE1 and DK11-CRB1. The parts look identical.

Purepony · Jun 6, 2021

I know the gear box is different but the bushings are the same and so are the shocks. mhmm I hope someone with more experience can chime in

dvw · Jun 6, 2021

The only difference between B & E Body factory stuff is a slight angle of the steering gear mount and various year sway bar mounting. The QA 1 site shows the upper and lower controls as the same part number. Tie rods, sleeves, and strut rods are the same from 62-76. So what is the difference between the two kits? Nothing I see. Call QA1
Doug

westie47 · Jun 6, 2021

dvw said:
The only difference between B & E Body factory stuff is a slight angle of the steering gear mount and various year sway bar mounting. The QA 1 site shows the upper and lower controls as the same part number. Tie rods, sleeves, and strut rods are the same from 62-76. So what is the difference between the two kits? Nothing I see. Call QA1
Doug

Okay cool, that’s what I was thinking as well. I’m not putting a sway bar on and keeping the stock K member so I think I’ll be fine.

B/E Front Suspension Compatibility???

westie47

Well-Known Member

Purepony

Well-Known Member

dvw

FBBO Gold Member

westie47

Well-Known Member

Similar threads