__Larsson____
Well-Known Member
What depth is an original 727 pan? Is there a matching alloy pan with the same depth? I dont want it to hang to low =P
727 oilpan depth?
- Thread starter __Larsson____
- Start date
Lefty71
Well-Known Member
One inch. I dont know if anyone makes a stock depth alloy pan.
You could get a plus four quart pan and and a filter extension..... your transmission will love you for it, and it wont hang down too low.
You could get a plus four quart pan and and a filter extension..... your transmission will love you for it, and it wont hang down too low.
__Larsson____
Well-Known Member
U got a link for a good one? =D
Lefty71
Well-Known Member
I had my best luck with a B&M pan which would now come from Holley, but I cant vouch for the quality now. I can tell you the Speedmaster pan is pretty much junk, and you will need to source proper allen head bolts, and you may need to actually elongate holes and such, just to mount it up.... Also, I would test the drain plug before putting it on the vehicle as well. My next one, I will probably try B&M again, hoping its the old castings, unless someone here says otherwise. Good Luck, Lefty71
TN Mopar
Well-Known Member
I bought mine from Mancini racing
+ one Quart
It was listed as a "Mopar Performance deep pan"
No extra frills like fins or Chrome
but the fit was excellent
2 years later no leaks
Best part was it was only $89.95
https://www.manciniracing.com/mopa9anda9no.html
+ one Quart
It was listed as a "Mopar Performance deep pan"
No extra frills like fins or Chrome
but the fit was excellent
2 years later no leaks
Best part was it was only $89.95
https://www.manciniracing.com/mopa9anda9no.html
Similar threads
