• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB A radio delete bezel

Status
Not open for further replies.

Preachr

FBBO Gold Member
FBBO Gold Member
Local time
3:51 AM
Joined
Sep 19, 2015
Messages
304
Reaction score
569
Location
Ontario Canada
Feedback: 0 / 0 / 0
for a 1964 Dodge 440. My Dodge has a Plymouth dash in it so I'm thinking that one for a 64 Dodge with the Plymouth gauge cluster, would fit the same as a 1964 Plymouth would?? Then one from either car should work ? These are both questions that I need others with more knowledge then I to tell me right.
Thank you to all.
dash of 64 024.JPG
dash of 64 025.JPG
 
Yes, Canadian instrument panel is same as Plymouth. Although U.S. Dodge dash individual parts will interchange, the "grain" of the parts is different.
 
Is this the look you are after or just a basic radio delete plate for a base model car? This picture was from another thread talking about swapping dashes between Dodge and Plymouth. As Dave said above the grain of the parts is different so it depends if you want to carry the look through across the dash into the glove box or just add the dash colored radio delete plate.
1964-dodge-polara-500-2-door-hard-top-10-jpg.jpg
 
I should take a different picture of my dash because, my dash ( a 440 model ) is a painted dash only from the heater bezel to the far side of the glove box. so,, with that in mind I'm not sure if mine should be like a painted bezel or a continuation of the heater bezel then paint to the far side of the glove box.. I'll try to take a better pic of my dash on the weekend. Thanks Dave6T4 and Part Stalker.
 
I should take a different picture of my dash because, my dash ( a 440 model ) is a painted dash only from the heater bezel to the far side of the glove box. so,, with that in mind I'm not sure if mine should be like a painted bezel or a continuation of the heater bezel then paint to the far side of the glove box.. I'll try to take a better pic of my dash on the weekend. Thanks Dave6T4 and Part Stalker.
This is the Radio Delete plate you are looking for. It's mine but not for sale..

DSCN2451.JPG DSCN2452.JPG
 
The one I posted would be for a 330 or 440 model...
 
Thank you for showing me that, definitely helps to have a pic of what yer lookin for.
My dash bezels ( heater bezel etc ) have lines that go up and down, I'm not sure if yours does that or not ?
Joe Suchy shows this on his list. Likely a repro at $115.00. 770-964-4441.
[email protected]
 
Last edited:
thanks for everybody's input, ya'all are real good with your knowledge.
I'll check into both..
 
These are plastic. The ones Joe sells are metal as orignal.
I have sent Joe Suchy a message, Thanks Dave6T4 and QuickBpBp for the tips,, always appreciated.
Preachr.
 
Last edited:
Post #8 has a mistake on the email address Dave 6T4, should probably say gmail.com not gail.com !!! LOL.
Of course that was the one that I choose to copy, ha ha. I have corrected and as far as I know the mail went thru.
 
Post #8 has a mistake on the email address Dave 6T4, should probably say gmail.com not gail.com !!! LOL.
Of course that was the one that I choose to copy, ha ha. I have corrected and as far as I know the mail went thru.

That why I quoted it and posted the correct one... see post #9
 
For anyone who wants to see radio installation and trim for 1964 Dodge 440, check out "New 64 Polara owner" post on Welcome Wagon. Has a nice shot of his dash.
 
The Fury and S.F. had the large alum. bezel that matched the rest of the dash bezels all others had the small metal style!
 
I have ordered a radio delete from Joe Suchy and it's on it.s way as we speak.
I thank all of you who have offered needed info on this.
There is a wealth of information on this site and it just keeps on coming.
Preachr.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top