Pretty average charger?
- Thread starter Sheriffandy013
- Start date
Great build sheet for a 68 318 Charger. No rips, tears, or spring damage.
Sheriffandy013
Well-Known Member
Good info, thanks, can you help with the suspension, #62 has a 4 in the box. Also for mouldings, drip or applique marked 5, body belt marked 0 and wheel lip marked 8. It looked like the file you attached may have had more pages than the 5 that hold the answers to these and other mysteries for a new charger owner. Thanks!
The Rebel
Well-Known Member
That code is 624 = Heavy Duty Suspension With Sway Bar
That code is 535 = Roof Drip Rail Molding
That code is 540 = Belt Line Molding
That code is 548 = Wheel Lip Molding
Those are the pages specifically for Chargers, but this is the site where I got it from which has a TON of info: The 1970 Hamtramck Registry Library Page (1965 - 1969) (hamtramck-historical.com)
Where'd you find the Build Sheet?
Last edited:
YY1
Well-Known Member
Rule #1 of build sheets-
make absolutely sure it's actually for your car.
(Does the VIN match?)
I've found that it's extremely common for a car to get a back seat meant for another car with the same interior option.
make absolutely sure it's actually for your car.
(Does the VIN match?)
I've found that it's extremely common for a car to get a back seat meant for another car with the same interior option.
Sheriffandy013
Well-Known Member
Similar threads
