The rounded no hole end slips into the lower windshield molding. The ends with the holes get screwed into the A pillar behind the upper part of the door.
Ok when you install the lower chrome it will sort of go around the lower part of the pillar. The portion that hangs over and around the pillar is where those go the rounded end will fit inside the lower moldings. The screw hole side should go towards the door. I don’t have them on the roadrunner or I would show you a picture.
Ok when you install the lower chrome it will sort of go around the lower part of the pillar. The portion that hangs over and around the pillar is where those go the rounded end will fit inside the lower moldings. The screw hole side should go towards the door. I don’t have them on the roadrunner or I would show you a picture.
Yes the end goes inside the lower trim. And holds it down from flopping. Sorry I didn't have anything to show you but you got it. I didnt have them when I did the Roadrunner. They are there I assume to keep the chrome from popping up there on the end. If you got em I'd use them. But you don't have to if you don't want to.
Yes the end goes inside the lower trim. And holds it down from flopping. Sorry I didn't have anything to show you but you got it. I didnt have them when I did the Roadrunner. They are there I assume to keep the chrome from popping up there on the end. If you got em I'd use them. But you don't have to if you don't want to.