• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1965 Coronet build

It appears to be....NOS?
 
It appears to be....NOS?
The book I have doesn't list water pump numbers. I guess its a maintenance replacement part?
A company in Texas rebuilds them. at least it has the penstar emblem.
 
So original pump rebuilt by outside source
 
Engine is painted. Put a run or two. Added a little sand. Makes it look factory

IMG_20210710_085429.jpg IMG_20210710_085420.jpg 162592705334250887560443394037.jpg
 
Original valve covers are hard to find...
 
Air cleaner was the hardest for me. $$$
 
Valve covers are new unused. Do have the chrome air cleaner. Its almost perfect.
Hey guys if you see something that doesn't look right shout out. Trying to do this project right.
Thanks
 
Last edited:
Valve covers are new unused. Do have the chrome air cleaner. Its almost perfect.
Hey guys if you see something that doesn't look right shout out. Trying to do this project right.
Thanks
I have a 64 Streetwedge car and just wondered if anyone knew if these motors had a insulation pad under the intake like the 67 440 had? I also did not have a windage tray did they start in 67 also?
 
Looks like valve covers are on backwards chimney and tapered end front on drivers side rear on passengers.
 
I also don't believe the motor mount bolts get painted , that's picky but
DSC05933.JPG
you asked.
 
Auto Transport Service
Back
Top