• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 71 satellite fender

Status
Not open for further replies.

DaneBisel

Well-Known Member
Local time
3:26 AM
Joined
Oct 20, 2013
Messages
468
Reaction score
106
Location
SE Ohio
Feedback: 8 / 0 / 0
i am looking for a drivers side fender for a 71 satellite. Please pm me if you have one available. Located in Ohio
Thank you for your time and consideration
 
I have a rusty one but the wheel arch is good if that's by chance what you need.
 
Thank you for the reply. Unfortunately the fender was hit right in the center of the arch and the previous owner tried to beat it out with a hammer... there isn’t a straight area above the wheel arch.
 
I have a couple but they are going to need rusty repair
 
Show me a pic.

Above the arch is OK too.

Marker light area, front lip, and dog leg are rusty.
 
cheap
 
Here it is. The picture doesn’t do it justice. The damage wrecked the upper body line as well

015A03F8-1F3A-4F6D-ACE6-C8919E42505B.jpeg
 
I'll get a pic of what mine looks like.

Going to start cutting up what's left of this car to regain some space.
 
If you can't find one.. I have one that you could cut that area out of and weld it in. If the rest of the fender is nice I would repair that way. Obviously it should be done by an experienced metal guy. I could deliver to the Mopar Nats in Ohio.
 
Finally got some pics.

There was some pitting on the top that was fixed and came back out. Hopefully you don't need that area.

Dog leg is bad.

$40 plus shipping if you're interested...and tell me where to cut.
20210713_152118.jpg
20210713_152126.jpg
20210713_152134.jpg
 
About 45 min from Tampa.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top