Front disk rear drum proportioning valve question.

Jamesjames · Jul 12, 2021

Greetings. I just plumed all new brake lines myself on a 66 charger for a front disk brake conversion. I plumed from the master cylinder to the distribution block. After I spend days pluming everything I realized that I never installed a proportioning valve…..
can I just install one of these bad boys under the car on the rear main brake line and call it good or do I have to completely re-plumb everything?

Jc cooper · Jul 12, 2021

In the back circuit from distribution to rear

Jamesjames · Jul 12, 2021

Jc cooper said:
In the back circuit from distribution to rear

Yes that is where I was hoping to be able to put it. Will that work?

Jc cooper · Jul 12, 2021

Not sure about that part but think Dr Diff has a good one that will!

steve340 · Jul 12, 2021

The valve can be fitted anywhere in the brake line to the rear brakes.
Most adjustable go in the engine bay after the distribution block so it is away from the road grime and water, and were it is easy to get at.

Front disk rear drum proportioning valve question.

Jamesjames

Active Member

Jc cooper

Second gear fun!

Jamesjames

Active Member

Jc cooper

Second gear fun!

steve340

Well-Known Member

Similar threads