Inner fenderwell bracket question 66 Satellite

RJS · Jul 14, 2021

I put factory style battery cables back in my car today even though I have headers. My question is are these other two brackets used in 66? My inner fenderwell only had one hole to accept the bracket shown to hold + cable and bolt.
*****Note not my car found the picture online.*****

Thanks again
Ron Sannino

VFilms · Jul 15, 2021

My '66 Belvedere doesn't have that bracket. I'll look at my Satellite and let you know what I find. Maybe I should get one of those.

R413 · Jul 15, 2021

Picture #1 is a 1967 car. I’m not sure if 1966 is the same as a 1967 on these battery brackets. That battery cable bracket is common on 1967’s does your car have a screw hole there? The brake line bracket near it is only on some of the 1967’s

Picture #2 those brackets are not used in 66-67 at all. I’ve looked at hendreds of them over the years.

RJS · Jul 15, 2021

R413 yes that is the only bracket I used on mine because that was the only hole I had in the inner fender. I bought the complete kit to have everything but guess I didn't need to.

Thanks Ron

VFilms · Jul 15, 2021

R413 said:
Picture #1 is a 1967 car. I’m not sure if 1966 is the same as a 1967 on these battery brackets. That battery cable bracket is common on 1967’s does your car have a screw hole there? The brake line bracket near it is only on some of the 1967’s

Picture #2 those brackets are not used in 66-67 at all. I’ve looked at hendreds of them over the years.

I’ll take a look at both cara today. Also have pics before deconstruction. Will look at those as well. Please Stand By!

VFilms · Jul 15, 2021

VFilms said:
My '66 Belvedere doesn't have that bracket. I'll look at my Satellite and let you know what I find. Maybe I should get one of those.

RJS said:
I put factory style battery cables back in my car today even though I have headers. My question is are these other two brackets used in 66? My inner fenderwell only had one hole to accept the bracket shown to hold + cable and bolt.
*****Note not my car found the picture online.*****

Thanks again
Ron Sannino

View attachment 1138889 View attachment 1138890

Here is a pic of my Belvedere during deconstruction. Yes, that bracket is there. Thanks for posting the question. Looks like I'm going to have to find it and install it. Couldn't find the other 2 brackets in any of my pics.

RJS · Jul 15, 2021

Yep the other two brackets are for sometime later, I think I remember them on one of my 70 B-Body's.

Ron

gtx6970 · Jul 17, 2021

Just ckd mine. and all it has is the smaller rubber coated one as shown above

BUT, this reminds me. I need to figure out for sure which one of these I need to get as its missing on my car . Long or short ????

RJS · Jul 17, 2021

Sorry Bill I'm of no help to your question because you have a BIG BAD HEMI!!!!!
Ron

440 4 speed · Jul 18, 2021

RJS said:
I put factory style battery cables back in my car today even though I have headers. My question is are these other two brackets used in 66? My inner fenderwell only had one hole to accept the bracket shown to hold + cable and bolt.
*****Note not my car found the picture online.*****

Thanks again
Ron Sannino

View attachment 1138889 View attachment 1138890

National Moparts has a picture of your brackets and explains what each bracket is for. Hope this helps.

Inner fenderwell bracket question 66 Satellite

RJS

Well-Known Member

VFilms

Well-Known Member

R413

Well-Known Member

RJS

Well-Known Member

VFilms

Well-Known Member

VFilms

Well-Known Member

RJS

Well-Known Member

gtx6970

Well-Known Member

RJS

Well-Known Member

440 4 speed

FBBO Gold Member

Similar threads