• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 1969 Plymouth Roadrunner Project Car

Status
Not open for further replies.

nascar37

Well-Known Member
Local time
6:50 AM
Joined
Dec 27, 2015
Messages
229
Reaction score
43
Location
Avon, NY
Feedback: 8 / 0 / 0
Contact seller
I plan to list this car on eBay in the near future but hoping I might be able to work out a deal with a forum member first.

1969 Plymouth Roadrunner Project


383 – 4 Speed – Post Car

Originally R6 – “Scorch Red" with Black Bench Seat Interior

RM21H9Axxxxxx – Matching VIN & Fender Tag

This is a fairly complete project car that was disassembled for restoration 25 plus years ago and then has mostly sat in storage. It was a complete running and driving car that I personally drove in the early to mid- 1990’s. It is currently a solid rolling chassis and will require a complete restoration with a fair bit of metal work. The car has been partially reassembled for the sake of transport, it rolls and steers but the brakes are not currently in working order. I have bought and sold several muscle cars from long distances so I will do my best to describe the condition accurately and completely. I will provide additional photos upon request for serious potential buyers.

Engine:
Correct “E” Code 383 HP block

Correct RM219A Roadrunner VIN stamp with non-matching serial number

Standard bore block with crank and main caps

Rods and pistons come with the car but are not currently in the block

Correct 906-cylinder heads, 402 oil pan etc.

Transmission & Rear End:
The original 4 speed parts were all gone when I purchased the car in the 1990’s - it was running and driving with a 727 console shift automatic in it

The car will come with a 727 transmission core

A new 4-speed hump comes with the car but is not welded in so you can go either direction with the car

8 ¾ rear – 742 case – comes with open carrier gear set not currently installed

Body & Chassis:
Six Pack fiberglass hood

Fenders were removed, stripped, and primed a number of years ago

Drivers side front frame rail is patched

Doors are fairly solid but will require metal work

Drivers side rocker requires replacement

Front floorboards have been replaced with originals from another car

Rear floorboards are original and solid

Both quarter panel skins require replacement
  • Passenger quarter is bad behind the wheel and below the side marker area
  • Drivers side quarter had a prior patch panel in it which has been cut out
Small holes on either side of the rear window will require patches

Extremely solid decklid with no rot in the lip or corners

Trunk floor and extensions will require replacement

Both rear frame rails are solid up to the last few inches towards the rear (a few holes - not completely crusty and weak – definitely supports the weight of the car on jack stands)

All wiring harnesses were removed and are included in the sale

Interior:
Front bench seat is the only major component missing from the interior (had race buckets in the 90’s)

Rear seat is included

Headliner bows, door sill plates, rear view mirror, heater box, dash pads, glove box door, ashtray, kick panels, and a number of plastic and soft trim parts are included

Glass:
All glass is intact and in decent driver quality condition

Side windows roll up and down

Trim:
Windshield stainless surround included and in nice shape

Rear window stainless surround included and in nice shape

Side view mirror included

Taillights, parking lights, side markers are all included

Front and rear bumper cores are included


Wheels\Tires:
Currently rolling on a set of Magnum 500 Wheels and very old non-road worthy bias ply tires

Clean and current (2021) New York State transferable registration in my name!

Note that NY does not issue titles for vehicles older than 1973 – ownership is signed over through the Registration. Car is being sold “as is” with the understanding it is a rolling project and not a running and driving vehicle. Due to non-working brakes pickup will require an electric winch to load safely. I am happy to work with any legitimate shipping company or help load it on your trailer.


$8,500 or best reasonable offer

Located in Avon NY 14414
South of Rochester


A8F21C5D-A179-4B84-9F69-A0FAA9D14D25.jpeg 668FD30C-4F87-4A23-97CB-94578FB80918.jpeg DD3F50D1-9582-4CC1-A88B-FE88182E92BA.jpeg 30CD5F0A-886B-488E-B9D5-FDE8D352189D.jpeg D4AD1BFF-22EA-49E1-B261-1F0F2534D8F6.jpeg 71132334-CE77-45A1-A846-DC50C2F5270C.jpeg E1C0CC7D-15AF-4F87-A85D-8BA866C7D1C5.jpeg 0C95023E-4A1A-4A81-92D6-142A3B035780.jpeg 79FF2925-0EBE-4BF6-9F71-364B0B144800.jpeg EF65C9A8-60E5-4300-B69D-1F4FC514BF21.jpeg
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top