• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Push rods

Status
Not open for further replies.

67coronetman

Well-Known Member
Local time
10:21 AM
Joined
Sep 5, 2008
Messages
1,655
Reaction score
346
Location
Blount Co
Feedback: 3 / 0 / 0
Looking for a set if push rods that measure 9.180 ball and cup. 5/16 and .080 wall.
Something i forgot to say these push rods i need are for a RB Block

If you have a set let me know..

Thanks.
 
Last edited:
Your inbox is full. Tried to send you a message
Good afternoon my box must be full I didn't know it I guess I have to go in there and check it I do apologize if you want to reach me at my email I'll give you that or I can give you my number you can text me my number is
 
Last edited by a moderator:
There You Go sir I emptied out my box my mailbox I didn't know it was that for I do apologize
 
Good afternoon my box must be full I didn't know it I guess I have to go in there and check it I do apologize if you want to reach me at my email I'll give you that or I can give you my number you can text me my number is
tour phone number had been removed.
You are not allowed to post personal information on open forums. Send that through a personal message only. Please keep you inbox cleaned of unwanted messages.
 
I have these. Their 11/32(.318 thou)Not sure where u want the measurement taken from/too. OAL is 9 5/16. ball on bottom is 3/8s. so is the cup measurement 3/8s. So my understanding is u take half of the cup measurement off. P/M sent with pics. Kim
 
Last edited:
Iskenderian push rods...
16288126785204440925071150018100.jpg
16288126785204440925071150018100.jpg
16288127264597399201038374775518.jpg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top