• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Length of 65 Belvedere drive shaft

peakandscoot

Well-Known Member
Local time
11:43 AM
Joined
Nov 12, 2015
Messages
228
Reaction score
158
Location
Clearwater FL
i dont need to know how to measurer a drive shaft. I need to know if any one knows the length of a 65 Belvedere drive shaft. I have changed out my old 904 cast iron with trunion and put a big block 727 in my 62 Fury. Joe Suchy told me i need a driveshaft out of a 65 Belvedere or Satellite. i have people out of town that have driveshafts but we need the length. I do not have a yoke or drive shaft at this time. All the charts seem to start at 1966.
 
I have one that I am going to put in my 65 Belvedere (swapping to big block). It is in storage so I will have to look for it, but I think it was 55 1/2". Will let you know the exact length when I look.
 
Went out and measured driveshaft for my '65 Belvedere with big block 727. From center of the rear U joint to center of front U joint for slip yoke is 53 1/2". Hopes this helps.
 
I have one from a 65 BB 727 Belvedere. 53.5"
PM me if interested.

20210803_112857.jpg
 
Auto Transport Service
Back
Top