67 Hemi GTX, was it a factory solid or hydraulic camshaft.
Solid or Hydraulic
- Thread starter dan juhasz
- Start date
tonysrt
Well-Known Member
Hemi's became hydraulic in 1970, so should be solid unless changed by someone.
Being the Hemi is an RB block is a cam from a 440 the same or are Hemi cams specific
Last edited:
IQ52
Well-Known Member
Hemi cams are Hemi specific. You cannot use a B/RB cam in a Hemi.
I see very little advertised for street hemi cams , who would be a good source if I need to replace it.
Eldovert
New Member
- Local time
- 11:39 PM
- Joined
- Mar 26, 2016
- Messages
- 1
- Reaction score
- 0
- Location
- Victoria British Columbia CANADA
Get one while you can...cams seem to hard to get at the moment.
i cant find anyone listing a solid lifter cam for 426 street hemi
fratzog lover
Well-Known Member
- Local time
- 1:39 AM
- Joined
- Apr 10, 2014
- Messages
- 5,197
- Reaction score
- 8,158
- Location
- Northeast Alabama
Thanks, on the Crower cam they call it a mechanical flat tappet but the specs show a zero valve lash setting? How can that be?
You might give Bullet Cams a call also. They have a lot of Hemi grinds. Brian
Similar threads
