• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FBBO Benefit Auction for @CudaChick1968!

drhill said:
I will start #8 at $50.
Click to expand...
Yes sir, thank you!

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $20.00 by @69 Sleeper Bee

Item #3: Beautiful hand-turned potpourri container and top donated by @Red63440 (Post #5) !
High bidder: $65.00 by @haywire 440

Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $75.00 by @dukeboy_318

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $25.00 by @Jerry Hall

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $200.00 by @coloradohill

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $100.00 by @1967coronet

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $100.00 by @69 Sleeper Bee

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper
 
Ed I've been scrounging around the garage and just don't have a lot here, most of my stuff is at the shop. I did find this that I would like to offer up for bids.
Its a new in the box CVF 90° billet manifold for a Sanden peanut style AC compressor. PT#7B10.

IMG_20210825_195037.jpg IMG_20210825_195200.jpg
 
I'll donate this intake mannyfold. It's an Edelbrock Performer 2101 for the generation 1 small block Chevy. Non EGR with hot air choke provision. My good friend said to donate this as we went with a Holley Street Dominator which more matches his build. No stripped threads. It's a nice intake, just dirty. Buyer pays shipping, please. Thank you drive through!

IMG_20210825_212220.jpg
IMG_20210825_212130.jpg
 
Mike67 said:
Ed I've been scrounging around the garage and just don't have a lot here, most of my stuff is at the shop. I did find this that I would like to offer up for bids.
Its a new in the box CVF 90° billet manifold for a Sanden peanut style AC compressor. PT#7B10.
View attachment 1157906 View attachment 1157907
Click to expand...
No worries Mike, looks like you done good! I'll get this added to the list and thanks!

RustyRatRod said:
I'll donate this intake mannyfold. It's an Edelbrock Performer 2101 for the generation 1 small block Chevy. Non EGR with hot air choke provision. My good friend said to donate this as we went with a Holley Street Dominator which more matches his build. No stripped threads. It's a nice intake, just dirty. Buyer pays shipping, please. Thank you drive through!
View attachment 1157911 View attachment 1157912
Click to expand...
Thank you kindly, 3R. Coincidentally, I was just reading what was happening over on FABO and lo and behold,
here you are over here helping the effort!
(I'm a fan BTW).
Added and thank you sir!

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $20.00 by @69 Sleeper Bee

Item #3: Beautiful hand-turned potpourri container and top donated by @Red63440 (Post #5) !
High bidder: $65.00 by @haywire 440

Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $75.00 by @dukeboy_318

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $25.00 by @Jerry Hall

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $200.00 by @coloradohill

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $100.00 by @1967coronet

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $100.00 by @69 Sleeper Bee

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165)!
High bidder: $
 
sam dupont said:
Almost 14 inch wing span. I added a photo, tried to add a movie of the prop spinning, but that must not be possible.
Click to expand...
If you'd like, you can send me the video and I'll put it up on my Youtube channel, then share it here. :)
 
RustyRatRod said:
I'll donate this intake mannyfold. It's an Edelbrock Performer 2101 for the generation 1 small block Chevy. Non EGR with hot air choke provision. My good friend said to donate this as we went with a Holley Street Dominator which more matches his build. No stripped threads. It's a nice intake, just dirty. Buyer pays shipping, please. Thank you drive through!

View attachment 1157911 View attachment 1157912
Click to expand...

Wow FABO royalty in the house!!!! Thanks Rusty
 
Good evening Gents

Diymirage here

as most of you know, not only is Leanna beloved with the B body crowd, over at my native FABO we are pretty fond of her too

fond enough for me to pop over here and place a $100.00 bid on item #3 (im sure one of my wifes friends will find a use for it)


i understand with this being my first post here i may not have a whole lot of street cred, but my 25K post on fabo hopefully covers me
 
Attention everyone!
@Red63440 has graciously offered to create a SECOND hand-turned potpourri container for
Item #3, so we'll now have TWO winners on that Item, with the two highest bidders getting them.
VERY cool of him to offer this, so anyone interested, please bid on #3 at whatever amount and I'll
keep track of the 2nd number as well.
Thanks @Red63440 !

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $20.00 by @69 Sleeper Bee

Item #3: TWO AUCTIONS - Beautiful hand-turned potpourri containers and tops donated by @Red63440 (Post #5) !
High bidder #1: $65.00 by @haywire 440
High bidder #2: $


Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $75.00 by @dukeboy_318

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $25.00 by @Jerry Hall

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $200.00 by @coloradohill

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $100.00 by @1967coronet

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $100.00 by @69 Sleeper Bee

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165)!
High bidder: $
 
diymirage said:
Good evening Gents

Diymirage here

as most of you know, not only is Leanna beloved with the B body crowd, over at my native FABO we are pretty fond of her too

fond enough for me to pop over here and place a $100.00 bid on item #3 (im sure one of my wifes friends will find a use for it)


i understand with this being my first post here i may not have a whole lot of street cred, but my 25K post on fabo hopefully covers me
Click to expand...

I go by cudascott over on FABO and I’ll vouch for you @diymirage
 
diymirage said:
Good evening Gents

Diymirage here

as most of you know, not only is Leanna beloved with the B body crowd, over at my native FABO we are pretty fond of her too

fond enough for me to pop over here and place a $100.00 bid on item #3 (im sure one of my wifes friends will find a use for it)


i understand with this being my first post here i may not have a whole lot of street cred, but my 25K post on fabo hopefully covers me
Click to expand...
Welcome to FBBO. Thanks for your generosity!!
 
diymirage said:
Good evening Gents
Diymirage here
as most of you know, not only is Leanna beloved with the B body crowd, over at my native FABO we are pretty fond of her too fond enough for me to pop over here and place a $100.00 bid on item #3 (im sure one of my wifes friends will find a use for it) i understand with this being my first post here i may not have a whole lot of street cred, but my 25K post on fabo hopefully covers me
Click to expand...
I reckon that'll work sir, thanks for participating. Your bid is recorded!

monaco66coupe said:
I will go 35.00 on #10, and 20.00 on #14
Click to expand...
Yes sir, thanks!

Current Auction List:

Item #1: Brewer's trans crossmember donated by @moparedtn (Post #1)
High bidder: $50.00 by @davek

Item #2: Cool vintage oil can donated by @Beekeeper (Post #2) !
High bidder: $20.00 by @69 Sleeper Bee

Item #3: TWO AUCTIONS - Beautiful hand-turned potpourri containers and tops donated by @Red63440 (Post #5) !
High bidder #1: $65.00 by @haywire 440
High bidder #2: $100.00 by @diymirage


Item #4: Brand new USA made big block rocker shafts by @69 Sleeper Bee (Post #12)!
High bidder: $75.00 by @68GTX4SPEED

Item #5: Beautiful refurbished small block valve covers w/breather and PCV from @dadsbee (Post #14 and Post #76) !
High bidder: $80.00 by @Builderguy

Item #6: NICE NOS Superbird wing decal set in black from Jerry @Jerry Hall (Post #17) !
High bidder: $100.00 by @haywire 440

Item #7: Beautiful 1970 NW Territories POLAR BEAR license plate by @Sahara (Post #25) !
High bidder: $1,000.00 by @440+6

Item #8: Mopar P5249712 SB rocker hold downs new in box and Made in USA by @440Coronet500 (Post #33) !
High bidder: $50.00 by @drhill

Item #9: Mopar RB electronic ignition (distributor, orange ECU, coil & harness) used by @Sahara (Post #36) !
High bidder: $75.00 by @dukeboy_318

Item #10: NOS Mopar cap, rotor, points and condenser (single points) for the winners' application by @HALIFAXHOPS (Post 44) !
High bidder: $35.00 by @monaco66coupe

Item #11: REALLY nice set of (4) "poverty" Plymouth hubcaps from a 1967 GTX by @dan juhasz (Post #45) !
High bid: $100.00 by @Wojo68

Item #12: NEW IN BOX Holley Street Avenger 770 carburetor by @Woodruff Carbs (Post #50) !!
High bidder: $200.00 by @coloradohill

Item #13: A pair of very nice Mopar-themed license plates by @Darter6 (Post #64) !
High bidder: $100.00 by @1967coronet

Item #14: Mopar factory chrome fuel door for Dodge RAMS '09-'18 by @JoePole (Post 62) !
High bidder: $20.00 by @monaco66coupe

Item #15: “Off the Wall” 18" x 24" wall art picture - 3 angles of a ‘68 Hemi Charger RT by @haywire 440 (Post #74 + Post #144) !
High bidder: $

Item #16: 66/67 blower motor assembly, tested and cleaned by @Durandal25 (Post #80) !
High bidder: $

Item #17: Antron Brown Top Fuel Drivers' Suit by @Darter6 (Post #105) !!!
High bidder: $100.00 by @jmk77379

Item #18: Big Block Oil Pan, freshly painted hemi orange, clean and dry w/baffle by @Ghostrider 67 (Post #110) !
High bidder: $100.00 by @Sahara

Item #19: '65-'66 Plymouth 10" hubcaps by @khryslerkid (Post #111) !
High bidder: $

Item #20: Set of Dodge aluminum Redline hubcaps, nice used by @Part Stalker (Post #112) !
High bidder: $150.00 by @69 Sleeper Bee

Item #21: Nice set of used 3" rear shock plates by @Part Stalker (Post #114) !
High bidder: $50.00 by @coloradohill

Item #22: Unique, very cool P-51 Mustang replica made from beer cans from @sam dupont (Post #117) !
High bidder: $100.00 by @69 Sleeper Bee

Item #23: NOS '69-'70 Charger rear emblem part number 2902306 by @Part Stalker (Post #143) !
High bidder: $100.00 by @f569

Item #24: Nice pre-owned '67 GTX flip top gas cap and bezel by @Don Frelier (Post #149) !
High bidder: $100.00 by @Beekeeper

Item #25: New CVF 90° billet manifold for a Sanden peanut style AC compressor #7B10 by @Mike67 (Post #163)!
High bidder: $

Item #26: Pre-owned Edelbrock Performer #2101 intake manifold for SBC (winner pays shipping) by @RustyRatRod
(Post #165)!
High bidder: $
 
Alright 2 more for the night. I found another what I think is NOS Charger emblem even though there is no package. Part number is 2841887 which says 66-70 Charger sail panel but again check my reference. Only a few minor blems in the black edge paint. Second is for my Michigan brothers which is an old Ken Ament Hartford Michigan Chrysler Plymouth license plate topper. It is about 10" wide and 3" tall. Would be better sent home than in a box in some bozos house.

cc 2.jpg
cc 3.jpg
cc 1.jpg
 
You must log in or register to reply here.

Similar threads

T
Mecum 2024 Kissimmee Auction Wrap Up Video
Replies
3
Views
634
tallzag
T
SteveSS
Theft recovery photo of the Kia. Follow up.
Replies
1
Views
386
maxwedgechar
maxwedgechar
SteveSS
Let's recommend a new vehicle for an old girlfriend.
2 3 4
Replies
77
Views
3K
YY1
YY1
Richard Cranium
Little Girl Dreams Of One Day Being Fat And Ugly Enough To Be Target Model
Replies
0
Views
367
Richard Cranium
Richard Cranium
SteveSS
An interesting car theft story close to home.
Replies
19
Views
1K
Sahara
Sahara
Auto Transport Service
Back
Top