Upper Arm CAM Bolts

70chall440 · Oct 21, 2021

hunt2elk said:
No, I use 2 of the Moog offset bushings on each side of the car. One pointed out and the other in. In the Moog instructions, they say to only use one per side, I believe the rear.

Ah gotcha... I must have been having a "senior" moment.. makes a lot more sense now (actually I always thought that you uses 2 per side...).

Kern Dog · Oct 22, 2021

Scott Engelhardt said:
If your ride height is low you will not get the positive caster you desire

You have it backwards.
As the suspension compresses, the caster increases. A lowered car has more caster, a raised car has less. The steering knuckle/spindle and UCA arrangement moves the upper ball joint rearward under compression.

Scott Engelhardt · Oct 23, 2021

Depends on the frame angle. If the front is low and the rear is high you will have a hard time achieving the positive caster you desired

Upper Arm CAM Bolts

70chall440

Well-Known Member

Kern Dog

Life is full of turns. Build your car to handle.

Scott Engelhardt

FBBO Gold Member

Similar threads