• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOR SALE 66 belvedere body trim

Status
Not open for further replies.

doublekrossd

Well-Known Member
Local time
4:53 AM
Joined
Mar 1, 2016
Messages
350
Reaction score
233
Location
Grand Blanc, MI
Feedback: 0 / 0 / 0
Contact seller
I'm still pulling pieces out of storage and trying to figure out what all I have. So far I have what appears to be a full set of body trim minus the fuel cap and decorative cap on the passenger side for a 66 belvedere.
I also have a couple head light and taillight pieces, 2 grills (neither perfect but neither bad)
And a bumper, but I'm not certain if it's front or rear as my memory sucks.

I'm really not sure what to ask for the parts but I know they have value. I've come to the realization that an original car type recreation will never happen and I sold my belvedere... that being said, if your looking for parts like these, message me.
 
This sounds like a 66 Belvedere II? Should you discover a gas cap in your pile, I would take it.
 
I know for a fact there's no gas caps. That's a rare bird my friend
Thanks. Yeah, definitely know that. Lost mine when I was 16, left it on the trunk and drove away. Little did I know it would be so rare.
 
20210819_170827.jpg
Are you selling by the piece? If so, how much for right door mldg?

Rick Crow
53rd year in my shop.
440 with track pack from 69 R/T
11" clutch, HD 833, 3:54 Dana
 
Last edited:
I would prefer to sell it as a whole lot simply so I don't have to sell individual remaining pieces
 
Please let me know if you change your mind.

If you sell the set, please ask if they have a nice right door molding. They might recoup a little of their investment.

Thanks
Rick
 
Last edited:
I'm still pulling pieces out of storage and trying to figure out what all I have. So far I have what appears to be a full set of body trim minus the fuel cap and decorative cap on the passenger side for a 66 belvedere.
I also have a couple head light and taillight pieces, 2 grills (neither perfect but neither bad)
And a bumper, but I'm not certain if it's front or rear as my memory sucks.

I'm really not sure what to ask for the parts but I know they have value. I've come to the realization that an original car type recreation will never happen and I sold my belvedere... that being said, if your looking for parts like these, message me.
Your in box is full....
Dave
 
Ive seen a few decent used ones over the past year. and gave it some thought to swap my plain black cap on my Satellite ,,,just to be different. But Ive never pulled the trigger on one yet.
 
Five or six years ago, I was asked to inspect a 1966 Belvedere II with a Hemi in it to verify that it was an actual 426 car. This turned out to be a real deal Hemi car, with a December 1965 build date. It had the HP2 signs on the front fenders. I was surprised to find that all of the long trim down the side of this car were chrome plated die cast pieces, instead of stainless or anodized aluminium that I expected. This would have been considerably more expensive for Plymouth than the softer trim. Were all '66 Belvedere II like this, or was there a running change to stainless?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top