Mike67
Well-Known Member
So I have a 6AL that worked fine last weekend. Went to the shop to button up everything after installing the inner springs. Went to start no fire, no error code, nada...
I've triple checked the battery feed, the ground and the 12v switched signal everything is correct ( 12.5v). Red LED does not blink, come on or do anything.
This unit has worked flawlessly until yesterday and MSD's guide assumes that you can see the flashes.
Any help would be appreciated... I'm to the point of thinking about putting a for sale sign on it as it is bleeding more $100 bills than boat, a stripper for a girl friend together!
Thanks
I've triple checked the battery feed, the ground and the 12v switched signal everything is correct ( 12.5v). Red LED does not blink, come on or do anything.
This unit has worked flawlessly until yesterday and MSD's guide assumes that you can see the flashes.
Any help would be appreciated... I'm to the point of thinking about putting a for sale sign on it as it is bleeding more $100 bills than boat, a stripper for a girl friend together!
Thanks