Turn switch and flasher schematics

Mike67 · Nov 22, 2021

Does anyone have the schematics that shows the poles ( NO/NC ) configuration for a 67 w/ 4 pole flasher?
Trying to do some troubleshooting and my freaking brain aint working...that or these LEDs are causing some major issues.
I have the FSM tyat doesnt show anything but the terminals aint cant find anything in the web.

Thanks.

Cornfield64 · Nov 27, 2021

Mike67 said:
Does anyone have the schematics that shows the poles ( NO/NC ) configuration for a 67 w/ 4 pole flasher?
Trying to do some troubleshooting and my freaking brain aint working...that or these LEDs are causing some major issues.
I have the FSM tyat doesnt show anything but the terminals aint cant find anything in the web.

Thanks.

When you run leds you have to put led flasher units. They don't have enough resistance to make standard units flash.

Mike67 · Nov 27, 2021

Cornfield64 said:
When you run leds you have to put led flasher units. They don't have enough resistance to make standard units flash.

Thanks, I got them when I ordered my headlights.
The problem was the replacement turn signal switch. The terminations on the replacement were backwards and did not match the FSM.

Turn switch and flasher schematics

Mike67

Well-Known Member

Cornfield64

Active Member

Mike67

Well-Known Member

Similar threads