Terry Kitzman
Well-Known Member
Does any one know who sells the replacement circuit boards for the tach sender on a 1966 Charger?
1966 Charger Tach. circuit board.
- Thread starter Terry Kitzman
- Start date
Try, Real Time Engineering ( RTE ).
TN Mopar
Well-Known Member
yes real Time engineering
I am using their tach board and their voltage limiter
I am using their tach board and their voltage limiter
Here is another source - but in Canada.
https://mrheaterbox.com/
They manufacture boards for senders and integral tachs and for points distributors and MSD distributors. Had one of their boards in my 66 for an MSD unit when I bought it and I went back to a dual point. They sent me a new points board in exchange for the MSD one back for no $. They are good guys.
https://mrheaterbox.com/
They manufacture boards for senders and integral tachs and for points distributors and MSD distributors. Had one of their boards in my 66 for an MSD unit when I bought it and I went back to a dual point. They sent me a new points board in exchange for the MSD one back for no $. They are good guys.
Terry Kitzman
Well-Known Member
I've got it ordered from RTE. Thanks a lot guys!
OG_CHGR
Member
This might solve my issue with the tach, it's just stuck at 3,000 rpm, no movement at all. That's basically the only issue with the car, is this circuit board the likely fix?
TN Mopar
Well-Known Member
my guess is no but it is just a guess
The needle is stuck at 3000
that's in the gauge
if it was on zero and not reading then you could suspect the sender
Similar threads
