drive shaft

PeteyDaMan · Dec 19, 2021

Pretty sure I know the answer to this but I figured I ask here as well.
I upgraded my engine/transmission from a mild small block with 727 to a beast of a 512 and an A833.
My current driveshaft has 7260 U joints which I'm guessing a way too small. I looked on Dr Diff's site and he has a 3" Strange driveshaft with 1350 U joints and both yokes for around $500 shipped.
Anyone ordered one from him?

thanks

moes · Dec 19, 2021

I've bought many items off Cass over the years. He is very knowledgeable and helpful with Mopars. Great guy!!! Give him a call or send him an email, he will answer all your questions.

4mulas · Dec 19, 2021

Yes I have.

Fran Blacker · Dec 19, 2021

What do you have once you get past the rear u-joint?

Any sticky tires with that 512 4 speed?

yella71 · Dec 19, 2021

Yes I bought that shaft. very nice part. Dr diff is the right guy to get it from.

PeteyDaMan · Dec 19, 2021

No, no sticky tires, just some wide BFG's, nor am I planning on taking it down the 1/4. I want the 8 3/4 to live as long as possible.
Once I lunch that I'll look at a 9" (I can't find nor afford a Dana 60)

slepr1 · Dec 19, 2021

I bought the same items from Summit Racing which was cheaper at the time. Strange then dropped shipped to my door. Important to follow the driveshaft order size guide, just don't order the same measurements as your old stuff. The rear yolk is a different length than the stock one so consider everything. I called Strange customer service with my questions and they were very helpful.

TN Mopar · Dec 19, 2021

I ordered my Strange driveshaft from Dr Diff
it was a wonderful experience
it came back pretty fast
and fit like a glove

I followed the measuring directions on the Dr Diff website
A new driveshaft is cheap insurance and I will never run a factory driveshaft again

drive shaft

PeteyDaMan

FBBO Gold Member

moes

Well-Known Member

4mulas

Well-Known Member

Fran Blacker

FBBO Gold Member

yella71

Well-Known Member

PeteyDaMan

FBBO Gold Member

slepr1

Well-Known Member

TN Mopar

Well-Known Member

Similar threads