65 Coronet power steering

Jim914 · Jan 19, 2022

With the motor in I trying to figure power steering hose. I have 2 pressure replacement hoses. Sure doesn't look right.
Are you required to bend the ends or these are not correct? If to be bent is there a pattern out there?
Thanks

Redsawacs · Jan 22, 2022

Oh, that doesn't look right at all....of all the lines I have seen, none have straight ends.

I think the proper routing is out of the pump and go towards the radiator, under the battery tray then back to the gear box. Requires curved ends though.

Dave6T4 · Jan 22, 2022

The correct pressure hose has curved steel line at each end. Go to RockAuto and find correct hose for your application. They are not that much $$$.

Jim914 · Jan 22, 2022

Thanks for the info

Jim914 · Jan 28, 2022

Got in the correct power steering hose.
Does this the correct routing?
Thankd

Dave6T4 · Jan 28, 2022

Yeah, that looks better.

Redsawacs · Jan 28, 2022

Much el better-o.

Can you link that hose to me when you get time....imma need one soon and that ine looks nice!

dmoore · Feb 1, 2022

I was lucky to find an NOS hose for my 64 Sport Fury 426. Fits like a glove. Should be same for your Coronet

dmoore · Feb 1, 2022

65 Coronet power steering

Jim914

Well-Known Member

Redsawacs

Well-Known Member

Dave6T4

FBBO Gold Member

Jim914

Well-Known Member

Jim914

Well-Known Member

Dave6T4

FBBO Gold Member

Redsawacs

Well-Known Member

dmoore

Mopar to the end

dmoore

Mopar to the end

Similar threads