SOLD Baldor servo motor * IM-2250-B14 *

Hi guys,
Oddball question here....any of you Electrical guys have one of these kicking around?

I have a need for the exact model Baldor #IM-2250-B14 Servo motor
5,000 RPM,
0.35Nm (.35 Newton meter (N·m) = 49.7 ounce-force inch (ozf·in)
60 Volts max
Tacho = 7.0 V/K RPM

Any information or leads that secure one for me will be much appreciated. Meanwhile I am trying to repair the existing motor.

Some munter got in this one a while back and did some damage. Already repaired the universal joint linkage.

Before anyone tells me....these are obsolete motors now, but nothing matches exactly what I need on Flea-bay.

Thanks FBBO for the advert

For a large industrial plasma cutting machine

No comment on any of these, but as you know obsolete sometimes means you use the best part you can find...

https://www.ebay.com/itm/1852566358...fcVL0Gm6TntRWMLyBi4qdRGwFTQ-601IaAvMfEALw_wcB

https://www.ebay.com/itm/373823596316

https://www.pjaonemus.com/index.php?main_page=product_info&products_id=565471


We have allot of systems with obsolete servos in them.. Was a time parts stayed the same, now we have systems that were designed three years ago that the parts are obsolete....

1 Wild R/T said:

No comment on any of these, but as you know obsolete sometimes means you use the best part you can find...

https://www.ebay.com/itm/1852566358...fcVL0Gm6TntRWMLyBi4qdRGwFTQ-601IaAvMfEALw_wcB

https://www.ebay.com/itm/373823596316

https://www.pjaonemus.com/index.php?main_page=product_info&products_id=565471

Click to expand...

Thanks man....I have been looking for 'close' also.

I had already checked those 3.

Bit the bullet and bought two very similar units off Fleabay....Rhode Island & Minnesota shipping out.