71 Superbee Graphics

Does anyone have the graphics page that shows the detailed placement of all the emblems, stripes, and graphics for a 71 Superbee? I saw one on the Superbee forum but it is not legible enough. Thanks.

i have a 71 spent a tone of time checking think i might be able to assist
what in particular?

A few that I saved

Fender placement-
Fore/Aft:
Charger with medallion: 2.5” approx to rear edge of fender (Base & SE)
Charger 500: 2.5” approx to rear edge of fender
Charger R/T: 2.0” approx to rear edge of fender
Charger Super Bee: 1.5” approx to rear edge of fender with 3/8" to 1/2" between emblem and bee decal

Up/Down:
In-line with side marker lights. With the side marker lights installed, tape a string from front to back with the string running through the center of the marker lights. Make sure the string is tight (straight). The string is now your reference line and should run right through the center of your emblems. See pics for examples.

Please note: These dimensions are taken from original Chrysler drawings. How the guys on the line placed them may be different. When possible, use your original locations for reference. Otherwise this info should get them where they were intended to go.