• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB 1966 426 Hemi Harmonic Balancer

Status
Not open for further replies.

Hemi2Much

Well-Known Member
Local time
8:59 AM
Joined
May 28, 2021
Messages
256
Reaction score
578
Location
Alabama
Feedback: 2 / 0 / 0
Looking for a GOOD 426 Harmonic Balancer. Mine appeared to be good but after the machine shop checked it out it is torn.
I think they are the same for 440 and 426.
If you have anything please contact me through DM.
Thanks, JKent
 
They can be rebuilt/revulcanized. I had my 318 poly damper done.
Mike
IMG_1891.JPG
IMG_1920.JPG
 
66 Harmonic damper is Hemi only, thicker than a 440. 493 Mike where did you get that done. Check key way for crack in corners, stick cars can crack them.
 
I have a good harmonic balancer that is the same thickness as 426 Hemi, but a little smaller diameter. Message me and I will send pics
 
I'll look into that. Can you tell me who you went through to get your redone?
Thanks, JKent
Sorry to be so late with a response. I used: Welcome to Damperdudes.net
I was mistaken though as they revulcanized the A/C drive pulley (weighted) for my 318 Poly. They may be able to rebuild your damper though, call them.
Mike
 
Last edited:
The machine shop said the keyway has cracks. Do any of you know if they can fix the cracks?
 
Status
Not open for further replies.
Auto Transport Service
Back
Top