• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Edelbrock torker2 intake manifold for 440

Status
Not open for further replies.

Moose440

Active Member
Local time
2:16 AM
Joined
Jul 4, 2020
Messages
43
Reaction score
8
Location
Robesonia pa.
Feedback: 0 / 0 / 0
Anyone have a edelbrock torker 2 for A 440 there willing to part with.
 
I have one. Only thing I see is that the engine it was on had the bolt holes ovaled out from the heads being cut/block decked.. Sold the engine kept the intake.. Let me know any interest..
 
Ovaled head bolt holes are not a big deal. Use the correct size washers to get the tight fit. All depends on how the ports line up. I always checked mine with a bent coat hanger to check the fit of the port at the head.
 
I will post some pics..
 
Sorry it’s just a Torker not ll.

B2F4DAC7-7650-4753-9EA4-C4F1758C98AB.jpeg
 
That appears to be a 2nd gen Torker. Torker II was the next gen as I recall. All are real good manifolds. Although I was always a Tarantula guy. I believe the single plane manifolds were much better on street combos than were ever given credit for.
 
I have one. Only thing I see is that the engine it was on had the bolt holes ovaled out from the heads being cut/block decked.. Sold the engine kept the intake.. Let me know any interest..
Sent a pm
 
I have a real nice one. Let me see if I can dig it out and get some pictures.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top