Marco Perez
Well-Known Member
Can someone tell me the trick to this?
Help taking off oil cap
- Thread starter Marco Perez
- Start date
just pull and twist its a breather not oil cap
Does it not just pull straight up?
- Local time
- 3:10 AM
- Joined
- Jul 17, 2008
- Messages
- 19,167
- Reaction score
- 52,998
- Location
- South Jersey USA
will the pickle jar be next? 
Marco Perez
Well-Known Member
Lol it's not coming up pulling up, this is where I add oil right lol. . New to this car I know it's a dumb question
Year car, I assume 66 or earlier?
- Local time
- 3:10 AM
- Joined
- Jul 17, 2008
- Messages
- 19,167
- Reaction score
- 52,998
- Location
- South Jersey USA
wiggle it while pulling........but don't shake it more than 3 times
Marco Perez
Well-Known Member
Yea 64
- Local time
- 2:10 AM
- Joined
- Dec 4, 2009
- Messages
- 34,063
- Reaction score
- 41,833
- Location
- Pasadena, Texas
Based on the Master cylinder....but man, my 66 didn't have anything like that on it.
That type cap either pulls off or is in a rubber grommet depending on the year of the valve cover.
- Local time
- 2:10 AM
- Joined
- Dec 4, 2009
- Messages
- 34,063
- Reaction score
- 41,833
- Location
- Pasadena, Texas
Mine had a pull off cap from a round metal 'spout'.....and it was fairly easy to pull off. 66 model.
Big Bad Dad
Well-Known Member
That doesn't look right for a 1964 car. Unless maybe a California car has different stuff for emissions. My 64 Fury 361 just has the straight oil cap with the springy tabs that pulls straight up. PCV on the other side.
- Local time
- 7:10 PM
- Joined
- Jun 12, 2012
- Messages
- 35,133
- Reaction score
- 94,151
- Location
- NZ - just short of the South Pole
Wrong forum.
- Local time
- 7:10 PM
- Joined
- Jun 12, 2012
- Messages
- 35,133
- Reaction score
- 94,151
- Location
- NZ - just short of the South Pole
How about a picture of the other bank of the engine.......you may need to walk around the car to get there.
ChryslerKid
Well-Known Member
- Local time
- 12:10 AM
- Joined
- Jun 6, 2020
- Messages
- 199
- Reaction score
- 227
- Location
- Sacramento California
Huh i guess 64 didnt have a cap on the pcv side. Ive had to use a crow bar to get some of the factory breathers out before, just replace it with a new breather and grommet after. Makes you wonder how long its been since the oil was changed.
- Local time
- 7:10 PM
- Joined
- Jun 12, 2012
- Messages
- 35,133
- Reaction score
- 94,151
- Location
- NZ - just short of the South Pole
Nice.
The rubber grommet kits available are probably the same for all years between 62-74.
Red63440
Well-Known Member
Similar threads
