From pwr steer to man steer

Virg464 · Nov 1, 2022

I have a manual steering box for my 66 coronet that I want to install, the car came with a pwr steer unit. My question is, is this a nuts and bolts only swap? Or...will I need a different steering shaft, and or other things? Thanks.

pnora · Nov 1, 2022

Virg464 said:
I have a manual steering box for my 66 coronet that I want to install, the car came with a pwr steer unit. My question is, is this a nuts and bolts only swap? Or...will I need a different steering shaft, and or other things? Thanks.

You will need the upper shaft and possibly the coupler housing along with the correct pitman arm.

Aron Gleason · Nov 1, 2022

Just extend the steering column shaft. And a correct pitman arm

GTX JOHN · Nov 2, 2022

Mopar used to make a billet adapter that turns it into
a 15 Minute job. Possible they still do?

Please use the PM system for that. Thanks

R413 · Nov 2, 2022

Just get the adapter. It plugs into your coupler and extends to the manual box. No BS. So much better than hacking things up.

Power to Manual Steering Adapter

the pitman arm is the same as long as they are both the smaller diameter spline on the box that your 1966 came with.

From pwr steer to man steer

Virg464

Well-Known Member

pnora

FBBO Gold Member

Aron Gleason

Well-Known Member

GTX JOHN

FBBO Gold Member

R413

Well-Known Member

Similar threads