1967 Belvedere II-What do OEM coat hooks look like
- Thread starter stat5
- Start date
Don67Satellite
Well-Known Member
- Local time
- 9:17 AM
- Joined
- Dec 16, 2021
- Messages
- 1,004
- Reaction score
- 1,393
- Location
- Abbotsford, British Columbia, Canada
I'm curious too. 
No hooks here.
No hooks here.
- Local time
- 12:17 PM
- Joined
- Aug 24, 2015
- Messages
- 642
- Reaction score
- 1,211
- Location
- West Palm Beach, FL
I have the one for my Satellite around here somewhere. I never reinstalled it because I didn't want to poke holes in the new headliner looking for the mount point. I'll look for it later if no one else comes up with a picture before I get to it.
Assuming I find it, I'll consider installing it if someone can post dimensions to the mounting hole.
Assuming I find it, I'll consider installing it if someone can post dimensions to the mounting hole.
guy gadbois
Well-Known Member
- Local time
- 5:17 PM
- Joined
- Apr 7, 2021
- Messages
- 694
- Reaction score
- 2,252
- Location
- Principality of Sealand
This is what mine looks like...
guy gadbois
Well-Known Member
- Local time
- 5:17 PM
- Joined
- Apr 7, 2021
- Messages
- 694
- Reaction score
- 2,252
- Location
- Principality of Sealand
Assuming mine is "correct" - and I assume so as its a 47k mile car and reportedly has never been tampered with inside, i.e. all original interior - the screw hole is approximately 1 3/4 inch from the top of the moulding and 3 inches forward of where the trim moulding angles down.
Oh, and strangely, my car has only one, on the drivers side. never noticed before...
R413
Well-Known Member
Yes that one looks correct. it is a 1967 only Item.
And drives side only is correct. If you hang something on the drives side the drive can still see just fine, but the pass side it will.d block the side view.
They are one year only.
And drives side only is correct. If you hang something on the drives side the drive can still see just fine, but the pass side it will.d block the side view.
They are one year only.
Similar threads
