Distributor bushing

• Jun 14, 2025

• #1

V

Vicb440

Active Member

Local time

6:56 PM

Joined

Oct 31, 2021

Messages

25

Reaction score

7

Location

Long Island, New York

Hi. I have a Chrysler distributor PN 2875116. Is the bushing from pioneer on 839007 compatible. It’s different than the factory one with the rubber on the outside of it. And how to I get out the old one. Do you hammer in a punch from the bottom or is that going scrape the housing. I could use more info. Thanks.

 

• Jun 14, 2025

• #2

Fran Blacker

1 of 27

FBBO Gold Member

Local time

6:56 PM

Joined

Sep 23, 2016

Messages

16,993

Reaction score

20,961

Location

Connecticut

@HALIFAXHOPS

 

• Jun 15, 2025

• #3

HALIFAXHOPS

MSGT(ret) and MOPAR only distributor rebuilder!

FBBO Gold Member

Local time

6:56 PM

Joined

May 5, 2016

Messages

5,544

Reaction score

3,544

Location

Halifax, PA USA

FSM should have it all in there around section 8-27. Have a pic of the rubber one? Never seen that. You can punch out the bushings then TAP the new ones in gently since I doubt you have a tool for it. Then Ream and burnish it and that should be it.

 

Last edited: Jun 18, 2025