• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

My new to me 64 Polara

As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the next best imo.
 
Last edited:
hunt2elk said:
As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the second best imo.
Click to expand...
I sent him a pm last night. I hope he has a switch left.
 
hunt2elk said:
As far as the turn signal switches. Have you checked with slant6dan? If not using a nos switch, his are the second best imo.
Click to expand...
I would be curious as to how every other car on the road was wired so the brake lights work independently of the turn signals and is it necessary to run the brake lights through the turn signal switch. It makes sense that many cars have separate lights for each.
 
Well some good news, I just bought a nice used Factory manual for less than $20 shipped.


1752173047264.png
 
How many do you need, Mike? I can dig through my stuff, and see what I have.
Dave
 
Dave6T4 said:
How many do you need, Mike? I can dig through my stuff, and see what I have.
Dave
Click to expand...
Probably a half dozen. Let me see if I can get some first before you search. I would like to get a new one somewhere so someone could possibly 3D print them.
 
It was so strange when the molding just fell off the car.
 
toolmanmike said:
It was so strange when the molding just fell off the car.
Click to expand...
Bump to bring this thread up to the top. I scrolled through many pages to find this again. :lol: BTW, this about the best clip I have. I need to stop down to the local nut and bolt supply to see if they have some clips close enough to work. I have been posting on a 3D printing thread on FABO and I might go that route if I can fine one clip good enough to copy.

molding clip.jpg
 
Last edited:
I just got my FSM. Damn, it is a nice one. And just $20 shipped. That is a steal. Classic Industries get's $65. I see some cheaper elsewhere though.
service manual.jpg
 
You must log in or register to reply here.

Similar threads

M
New member, 64 Polara
2
Replies
23
Views
1K
Dave6T4
Dave6T4
Yennes
64 polara defrost vents
Replies
6
Views
1K
493 Mike
493 Mike
toolmanmike
  • Locked
FOUND Looking for a 64 Dodge right headlight bucket
Replies
2
Views
380
toolmanmike
toolmanmike
rpmmachineco
Go to for steering box? Manual early b body
Replies
6
Views
716
rpmmachineco
rpmmachineco
Yennes
  • Locked
FOUND 64 Polara hinge cover clip
Replies
5
Views
886
Yennes
Yennes
Auto Transport Service
Back
Top