Separate names with a comma.
HI been awhile since i built a motor I need to get core plugs and i noticed they come in shallow and deep ,Im doing a 383 which one should i get?
this may be a way out there question but has anyone run a chevy manual trans on a big block mopar i just got a great deal on a bell housing...
I saw the Brewers add for 4 speed conversions id like to convert my 62 dart to 4 speed has anyone doe it using the Brewers set up and is the price...
need photos if posible of what the lingkage and kickdown lok like on a 62 dodge wirh dual 4 manifold thanks
Hi I'm running eddy victor max heads it's hard finding a good used max wedge port manifold for sale that has a 4500 flange if I used a 4150 to...
i have to offer this 512 stroker motor made from a 400 block new 4.25 crank Manley H beam rods JE pistons with Moly rings Comp Cams double roller...
im trying to build an old school gasser look ,straight axel etc. but was told that some early AFX SUPER STOCK cars used a special offset control...
trying to build a old school motor for fun have a 426 and will be running a hllborn injection unit what heads would work well (with some work)...
a friend is selling bell housings I think I know the answer but I need clarification thanks , what is the difference between a 3 and 4 speed bell...
im sure this is been answered but I know I saw a company that sells prebent kits to convert 62 single pot master to dual on early b body cars I...
I'd like to take off my trim from my 64 330 what should I use and who sell the plastic tabs to reattach
would like to know the pros and cons of running a Milodon external oiling system I have the stationary pick up but have a deal for the swing arm...
Im going from max x-ram (440) to inline 2 fours on a stock manifold carter carbs(383) I have the max wedge throttle cable and kick down lever...
the K member in my car might be from a six that someone hacked up to put a v8 (64 330) what kay member can I use with out setting the motor back...
building a engine that will run e85 found a roller cam and lifters at a good price ,question is its in the 750 lift range ,ive never had a roller...
I have found what seems to be a good deal but I need to know can you run solid ally heads on a water block(stock factory) without having heating...
looking for reasonable price on a set of front seats from a a-100 van or truck plus a ,A-100 straight axel for a gasser project with the sons thanks
I cant remember but is there a difference in max wedge rocker arms and regular ones other than the pedestal hold downs on the max heads
need advice on any one whos seen or done a flip front on a 64 330 im building an old school gasser and would like to do the flip front on it
looking at getting a main girdle how important and do I need one on a RB engine
