Separate names with a comma.
Take your 0.019 & 0.033 numbers and move them to read 0.014. set those readings @ "0".
Now split your 0.058 reading to 0.029. & 0.029.
Ahhhh Yes! A little Finesse! It's all in the wrist action. Yeah, if the bearings fit nice and
tight and have alot of crush, they'll transfer any...
How can a Wooly Mammoth ride a Sport Bike?? I kind of like her but the show is stupid.
"The Day The Earth Stood Still"
Best ever Sci-Fi Flick.
The Lady can really Light up a room!
I purchased a Stainless Steel tank about ten years ago so I didn't have to
worry about rust and corrosion. Costs a little more, but shines real Purdy!
Do you have any that were behind HP engines????
Epoxy brand is not as important, just use a brand name. Before you put that on though,
use 80 grit DA paper and wipe down with a wax & grease...
If he wanted to drive around that curve doing 87mph, he should have been driving a
Porsche or Lambo! An SUV? No way. It's all about choices.
Clint said it best: A Man's gotta know his limitations.
That car is a beautiful weapon that in the wrong hands can hurt people.
All of that power...
Just don't end up on YouTube!
Doesn't anyone realize that you don't accelerate until you are straight in your lane?
And no traction!
Welcome to Da Hood! OOOOOOHHHHH Baby! Nice!
Just take an old lifter apart and mix up some Epoxy and fill-er-up. wait till
it cures and you're good to go. I've done this in the past but make...
Make sure you seal the cracks with elastomeric calk so water doesn't get under the slabs
and do the freeze-thaw Watusi!
I'm surprised that the rod didn't "chatter" by clamping the small end in the vice and cutting
all the way out there! Of course, you said you only...
Sorry for your predicament! Hope you can get away with .040+ pistons. you won't know until
you Mic it and then it gets set-up and bored. Hopefully...
I'm putting a skid plate on my 440 K-Frame because I'm running the Milodon Road Race
pan and because I'm a Chicken!
If I had those three cars in a garage like that, I wouldn't want to leave home!