Separate names with a comma.
Has anyone here built a run-in stand using a bell off a TF and a empty converter? Mike
Not a Torqueflite (C-6) but funny! I rebuilt many of these over the years but, none made me laugh like this! Mike [ATTACH] [ATTACH]
I just read about the new cross bolt main caps from Milodon. Talk about a slick design. I don't have a link but, it shouldn't be too difficult to...
SuperStock Engine Now Available as Standalone Hellcrate Option (dodgeforum.com) Mike
Good article here: https://moparconnectionmagazine.com/hughes-engines-tech-center-lifter-bore-lineup/Mike
Hi fellas, I'm thinking about selling some 8 3/4 pigs. Most rebuilt but I have a used 3.23 Sure Grip 7260 yoke. Would 250 be a fair price? I drove...
Hi fellas, The previous post got me thinking about the factory tool for burnishing. Does anyone have one? Or can anyone tell me the diameter of...
Hi fellas, The vent itself is leaking gear oil right out the cap and of course all over the housing, shock, and fuel tank. I have had it out twice...
I need a oil filter adapter plate gasket for my 65 318 (poly) and all I can find (70078 Fel-Pro) is a o-ring. I'm sure it takes a flat gasket in...
Hi fellas, I am rebuilding a (unknown core) 1968 727 B for a customer and it had a modified valve body installed. I would like to contact the...
Hi fellas, I've welded half couplings and pipe plugged several housings with good results but on my NEW 65 Coronet I was thinking about drilling...
Hi fellas, I am a diehard 8 3/4" fan, so I went to the fabricated Moser axle housing. It is a real nice piece but, I also ordered it with a back...
Hi fellas, I just wanted to share my experience with this procedure. I machined an adapter to bolt on the crank flange to mount my dial indicator...
I need to pull the dowels out of the block to install offset dowels. One came out with Vise Grips but, the left dowel is really tight. The local...
Over the years I have repaired a few tubes that are cracked in the O-ring groove. Usually a quick braze or silver solder. Of course when my own...
Hi fellas, I'm looking for input on an idea for fresh air to feed my 65 Belvedere. My thought is to use a Spectra dual inlet setup and feed it...
Hi fellas, I just solved a couple of installation issues I thought I would share with you. The MM built 540 has a single external oil pump suction...
Hi fellas, What product/treatment is correct or best to use when fastening parts to aluminum engine blocks? Mike
Hi fellas, I'm building a 1965 Belvedere in the Pro Touring style. I have decided to turbocharge and I'm going to use Squires dual turbo universal...
