Separate names with a comma.
Do you see any bolts holding the radiator support in place? No? It's welded in place. You should be able to pull the combo out anyway. Take that...
Small slide hammer? You shouldn't have to "tap" the oil pump drive into the bushing. It should slide right in with a screw driver twisting into...
The long one is definitely a transmission to block brace. The other? Exhaust hanger? Mike
Nice repair! You have to think outside the box due to your location. I salute you sir! Mike
What's wrong with 40 year old women? Mike
Don't forget: anti seize is your friend! Mike
My 94 Dodge 2500 came with West Coast mirrors retained with nutserts. Mike
As long as he had to drill holes in the door the nut inserts were easier and no door disassembly was necessary. Mike
I think that foam seals the cable to hole gap. Mike
Put it where it is comfortable for you. It is not critical unless it's a accurate restoration. Mike
There are different configuration arms that mount on the valve body shaft protruding thru the case. I think the only way to confirm action is to...
Do you have the original pump yet? Just swap reservoirs if you do. Mike
He musta been a large fella! Mike
Earlier springs had round eyes. Mike
Use the earlier style. Mike
There is a multi purpose thrust washer at the commutator end of the armature with 4 tabs that serves to hold the brushes back during assembly....
I was working at the local Dodge dealership in 1969 when I was tasked with a starter replacement on a 428 Cougar. They had 3 bolts to mount, no...
I fabricated one for my 65 Coronet. Used 1/2" MDF board and the wife sewed up a cover for it. Mike[ATTACH]
I imagine you will need vacuum to operate the air doors in the heater housing-heat/defrost, etc. Mike
Why not just take the car to a muffler shop? Mike
