Separate names with a comma.
I never has an issue either, but it's been about 10-years since I got parts for the convertible.
If your really board with this COVID-19, you can profile the cam taking measurements every crank degree. Enter into spreadsheet and align the...
Larger is easier to read / split degrees, and good if engine is on engine stand. If swapping cams in the car, need the smaller diameter to clear...
Two ways to convert to 24 spline. Either using '67-70 pump stator support and narrow band drum, or '71-up pump stator support and wide band drum....
No way to tell for sure without removing the transmission, but if it has a smaller than stock Hi-Stall converter, it likely is not a 19-Spline input.
Those switches are a bit different than the '69 switch. Not sure if they snap in/out of the bracket. Found these photos on e-bay:...
If it is like the ones in my '69 Coronet, the door panel has a switch holder case/bracket thing that attaches to the door panel that has four...
I like the insulator gasket kits, as I usually need new hardware too. I also like the bolt hole inserts that limit how much you can snug down the...
I use the thick heat insulator style carb gasket with hardware kit. Example (0.320" thick): https://www.summitracing.com/parts/edl-9265/overview/
If you still have problems, inspect the rubber fuel lines at on the suction side of the fuel pump (gas tank to hardline, and hardline to pump.) I...
